.356 9mm projectiles

[medium187mph]

I just want to confirm that I can reload a 124gr .356 berry bullet for a stock G19.

I am pretty sure it’s not a problem but wanted to get a consensus as I’ve only loaded .355’s

https://www.berrysmfg.com/product/bp-9mm-356-124gr-hhp

 

[Control for Smilers]

hell yes.

 

[Control for Smilers]

but...if you feel uncomfortable with them...I can take them off your hands, LOL.

 

[Freshly Minted Georgian!]

They'll work fine. If you REALLY have concerned about a thou you can squeeze em through a Lee .355 sizer on your reloading press.

 

[1006]

They are soft enough to squeeze through, or even expand out into the barrel.

 

[rosewood]

I have found the plated bullets are more accurate than the jacketed in many handguns. They fit tighter in the bore and seal better. They are soft enough to swage down to the bore size like cast boolits do. And no lead vapor to boot like you get with open bottom FMJs.

Rosewood

 

[Kullas]

Just dont put a heavy crimp on them.

 

[Control for Smilers]

I have found the plated bullets are more accurate than the jacketed in many handguns. They fit tighter in the bore and seal better. They are soft enough to swage down to the bore size like cast boolits do. And no lead vapor to boot like you get with open bottom FMJs.

Rosewood

totally agree

Just dont put a heavy crimp on them.

slight taper crimp only to remove bell.

 

[Control for Smilers]

and you really want to bell a little more than with fmjs. not much but some. they ARE softer.

 

[Leviathan]

Probably only loaded a Bazillian (+/- 17) .356 Barry's 115 FMJ. 1000% Good to Go!