I have a G-34 with a silencer. Is it possible to use the same silencer on a AR-15 built to 9mm?
-
ODT Gun Show & Swap Meet - May 4, 2024! - Click here for info
9mm silencer
- Thread starter hud2112
- Start date
Don't see why not.
What kind of suppressor do you have? Does it have a booster on it? If it does have a booster or a "Nelson Device", I would recommend getting a fixed mount to mount it to the AR.
Advanced Armament corp, # EC0-9
I'm concerned about the blowback pressure being too much with the silencer
Most AR9's have a heavier buffer since they are a blowback design. Should not have much problem with the pressure.
Are you concerned with gas blowback in your face or increased pressure resulting in possible damage to the gun?
If it seems over gassed, try using a heavier buffer or drop a few quarters into the buffer tube before the spring goes in. This will increase the delay that the bolt has before opening.
Are you concerned with gas blowback in your face or increased pressure resulting in possible damage to the gun?
If it seems over gassed, try using a heavier buffer or drop a few quarters into the buffer tube before the spring goes in. This will increase the delay that the bolt has before opening.
You're going to need this: http://www.advanced-armament.com/Im...l-EVO-9-ECO-9-TI-RANT-9-ILLUSION-9_p_720.html
I think the ECO 9 has a stainless steel blast baffle so it should be OK.
I think the ECO 9 has a stainless steel blast baffle so it should be OK.
I really appreciate the info.
I run a TiRant45 on 45acp, 9mm pistol and AR9 without any issues. You just need to get the correct piston (AR9 is normally 1/2x36), a fixed barrel spacer, and a lot of ammo.
