AMP Annealer

deathbeforehonor

Default rank <500 posts
Survivalist
45   0
Joined
Nov 27, 2015
Messages
463
Reaction score
300
Location
Newnan
built my own.
Gas or electric? Microwave Carousel? Please do share, I might consider making one for 300 HAM'R & 300BLK as converting them is time consuming, but free :) However, I'd like to make them last as long as I can. All other brass, at least for the calibers I currently load (most common ones), I have brass by the bucket full. But someday in the near future I was thinking of picking up a new exotic rifle cartridge for a real precision gun, leaning toward 300PRC Bolt gun or MLR 33 Nosler from Alex Pro.. mm so dreamy. Neither of those are cheap in the Brass department.
 
87   0
Joined
Jun 6, 2014
Messages
7,942
Reaction score
7,596
Location
30046
Gas or electric? Microwave Carousel? Please do share, I might consider making one for 300 HAM'R & 300BLK as converting them is time consuming, but free :) However, I'd like to make them last as long as I can. All other brass, at least for the calibers I currently load (most common ones), I have brass by the bucket full. But someday in the near future I was thinking of picking up a new exotic rifle cartridge for a real precision gun, leaning toward 300PRC Bolt gun or MLR 33 Nosler from Alex Pro.. mm so dreamy. Neither of those are cheap in the Brass department.
I made a gina erick annealer. cost about $450.
 
87   0
Joined
Jun 6, 2014
Messages
7,942
Reaction score
7,596
Location
30046
upload_2021-4-20_22-55-24.jpeg
upload_2021-4-20_22-55-24.jpeg
upload_2021-4-20_22-55-24.jpeg


top 2 pics are 300bo conversions.
 
87   0
Joined
Jun 6, 2014
Messages
7,942
Reaction score
7,596
Location
30046
I also use it for 308 match brass and 556 77gr match loads. I also convert 556 to 300 blackout and .221 fireball...for a 20 vartarg boltgun. .221 fireball is the middle step. it is also the cartridge 300 whisper is based off.
 

GTN

Wolf Icon Lifetime Supporter
Frontiersman
86   0
Joined
Oct 28, 2010
Messages
993
Reaction score
247
Location
NW Ga
I guess I should have mentioned that I am most interested in the consistency it gives on neck tension and the longer brass life will be an added benefit for me. I've looked at most all of them including building one myself and haven't ruled that out. If I weren't an electrical retard I for sure would build one.
 

GTN

Wolf Icon Lifetime Supporter
Frontiersman
86   0
Joined
Oct 28, 2010
Messages
993
Reaction score
247
Location
NW Ga
What about salt bath annealing any of you guys have any first hand experience? I've read quite a bit on it and have mixed opinions.
 
Top Bottom