• ODT Gun Show & Swap Meet - May 4, 2024! - Click here for info

Anyone have experience with the Barnett crossbow cocking device

jdav

Default rank <3000 posts
ODT Junkie!
51   0
Joined
Nov 14, 2013
Messages
2,751
Reaction score
1,402
Location
North Georgia
First year crossbow hunting. Bought a Barnett to see if I stick with it & then move up to an Excalibur or Ten Point. I installed the cocking device on the Barnett & it has been nothing but trouble. The spools that house the crank string don't move in unison. One will retract while the other is letting slack out. Finally took the device off tonight. Am I using this wrong or is it just worthless?
 
First year crossbow hunting. Bought a Barnett to see if I stick with it & then move up to an Excalibur or Ten Point. I installed the cocking device on the Barnett & it has been nothing but trouble. The spools that house the crank string don't move in unison. One will retract while the other is letting slack out. Finally took the device off tonight. Am I using this wrong or is it just worthless?
Cocking devices should not be complicated. Sounds like it is just a POS.
 
Back
Top Bottom