• ODT Gun Show & Swap Meet - May 4, 2024! - Click here for info

ARC22 bullets tumbling

Pholley526

Default rank <1000 posts
Frontiersman
66   0
Joined
Feb 13, 2013
Messages
860
Reaction score
374
Location
Dallas
So I finally picked up my Dobbs Arc 22. Man that wait is BRUTAL! So I finally went to to go check it out with a 10/22, cz455 and a sr22. Long story short I’ve got bullets tumbling 15 feet away from the target. I noticed there is a steel baffle out of the bunch, does it matter where it is placed in the can? I can’t quite tell if I have a baffle strike as I need to clean the baffles. I tried it on all 3 hosts and it’s tumbling with all 3 which leads me to believe its in the can itself. I purchased the can 11/18 from adv out and I read on another thread of this happening with the same can/host combo. Surely someone here in the vast land of odt has some answers-or a way to get ahold of Brian. Any help would be GREATLY appreciated!
 
I used both cci standard and subsonic. It quit tumbling as soon as I took the can off. I’m pretty sure I had the steel baffle closest to the muzzle but I’ll try again. I was understanding that dobbs is just temporarily closed due to construction of a new shop?
 
Back
Top Bottom