• ODT Gun Show & Swap Meet - May 4, 2024! - Click here for info

Attention Welders Radnor Welding Rods Sticks whole box FREE

jmartinroe

Wolf Icon Lifetime Supporter
ODT Junkie!
198   0
Joined
Aug 28, 2013
Messages
3,768
Reaction score
2,325
Location
Atlanta, GA 30345
I picked these up off the road. Full box, some of the material surrounding the metal is coming off. All the box says in good for any angle and 45-80 amps.
I live near Shallowford Rd and 85 N, two exits inside the Perimeter or I work in Norcross M, W and Th near Peachtree Industrial Blvd and Holcomb Bridge Rd.
Let me know and I will bring them with me.
Jeffrey
IMG_2963.JPG
 
Yes and no. While they're useless for any more stick welding. They could be used for filler material (After removing what's left of the flux) during a pass if you're needing to bridge a large gap. But that's about it.
 
Yes and no. While they're useless for any more stick welding. They could be used for filler material (After removing what's left of the flux) during a pass if you're needing to bridge a large gap. But that's about it.

Maybe if you would quit blowing hole in the metal... :peep:
 
If you're blowing holes in the material, additional filler rod isn't the problem. Should have mentioned this isn't something you'd do on a critical joint.
 
Back
Top Bottom