Burris Xtreme Tactical Signature Rings. Has anyone used them?

[Bear44]

I'm looking to get maximum elevation adjustment out of a couple of scopes, which means bottoming out the adjustment at reasonably close range (200 yards). These rings have the ability to add elevation in increments of 5 MOA all the way up to 40 MOA in addition to anything the base gives you. GREAT IDEA! If they're not crap.

Does anyone have experience with them?

Before anyone starts talking about just a higher MOA base, I may need to add as much as 140 MOA of adjustment to my 200 yard zero to do what I want. If I can set up a scope with 100 MOA of internal adjustment to be bottomed out at 200 yards I can add another 30 MOA with a MOAR reticle, then go to a lower magnification (second focal plane scope) to get the last 10 MOA of hold over.

 

[REDX]

Depends on what you want to use them for. Bench or just prone, they should work fine

 

[Bear44]

Depends on what you want to use them for. Bench or just prone, they should work fine

What would make them less than good for other situations?

 

[REDX]

I actually just re read the torque specs and they can be torqued up to 70 in/lbs. with that being said they should hold up.

 

[Bear44]

I actually just re read the torque specs and they can be torqued up to 70 in/lbs. with that being said they should hold up.

Cool. I think I've found the scope, base and rings solution for Legion. Going to try for 2500 yards.

 

[REDX]

2500? 20 Moa base should be plenty. what caliber?

 

[Bear44]

2500? 20 Moa base should be plenty. what caliber?

338 Lapua. Requires 143.7 MOA come up from 200 yard zero when at sea level, so 20MOA base ain't gonna get it done.

 

[REDX]

Gotcha, What scope are you looking at getting?

 

[cmshoot]

As another option, Near Mfg will machine you a base with 10, 25, 45, or 75 MOA of cant.

http://www.nearmfg.com/products.htm

 

[Bear44]

Gotcha, What scope are you looking at getting?

Nightforce 5.5x22-56 with MOART recital. Picked it up this morning.