KRG Bravo Chasis For Tikka T3X with full KRG ARCA Rail and MSD 10 round magazine. Like new $375
Video available upon request
Bravo Chassis: The Bravo provides the essential chassis benefits combined with conventional target/varmint ergonomics. If you’re looking for your perfect balance in Tikka T3X Chassis, Bravo is exactly what you need.
Bravo Chassis Forend:
Premium KRG designed pad that is light, durable, and comfortable to shoot.
Video available upon request
Bravo Chassis: The Bravo provides the essential chassis benefits combined with conventional target/varmint ergonomics. If you’re looking for your perfect balance in Tikka T3X Chassis, Bravo is exactly what you need.
Bravo Chassis Forend:
- Polymer for light weight and to eliminate heat transfer to/from the shooter's hand.
- Mounting holes at various positions will take L2 Picatinny rails, Tripod Mount, Barrier stop, etc .
- Mlok slots in sides and bottom of forend for universal accessories mounting
- Access hole for action mounting screw, so you can remove the action without removing forend.
- Full length aluminum backbone from the action to the tip of the forend
- Radius bedding system which is CNC'd into aluminum for consistent contact between action and chassis
- Hardened stainless steel recoil lug instead of aluminum ones found on stock T3’s. (T3 version only)
- Accepts the Whiskey-3 gen 3+ Spigot Mount.
- Designed for 5 or 10 round AICS magazines (with or without front spacer plate in T3, with spacer plate only in Rem 700 unless you have a modified action).
- Barrel contours accepted: 1.25" for 4" in front of action face, then 1.20" straight to end of forend. A 1.25" straight cylinder barrel will fit but we feel that the clearance is too minimal. We recommend using no larger than a varmint contour to keep proper balance.
- Molded light weight trigger guard
- T3 versions will accept KRG Midas 2-Stage trigger, Barnard trigger for T3 as well as factory trigger
- Mag catch extender button included (polymer version), and you can upgrade to an aluminum one available in our "Accessories" section
- Infinitely adjustable within range (~1” travel)
- Can be quickly removed and re-installed, uses a clamp and thumbscrew design.
- Made of polymer to limit heat transfer to or away from your face.
- Adjustable with spacers in 3/8" increments with nearly 2 1/4” of adjustment range.
- LOP range varies slightly between versions but is roughly 12.8” to 15” (technically even longer is possible with even more spacers).
- Bravo's include our 1-3 LOP kit which includes 3 spacers and the hardware to mount either 1, 2, or 3 allowing a max LOP of about 14"
- Very strong reinforced polymer material.
- Mounting points for external QD cup.
- Built in thumbshelf for same-side-thumb-grip shooters.
- Can be configured with a continuous angled lower surface or a "butthook" configuration
- Modularity with X-ray and Whiskey-3 back ends, either of those will fit on Bravo and vice versa
Premium KRG designed pad that is light, durable, and comfortable to shoot.
- Remington 700 pattern so user can install aftermarket pre-fit pads if preferred.
- Forend has M-LOK slots on each side and bottom along with other holes for mounting KRG accessories
- Buttstock has one position on each side for external QD cup (1 ea included).
- Buttstock includes angled cover with the "Butthook" cover sold separately
- Harris bipod stud included on forend.
- Spigot Mount can be added to front of chassis.
- Ambi QD sling plate can be mounted and provides 3 positions for QD sling or HK hook sling attachments.
- Large selection of accessories from sling mounts to tripod mounts.
- ***All stocks come with 1 ea polymer Picatinny rail (made by KRG)
- Aluminum parts are hard anodized (Type III).
- Nearly all fasteners are stainless steel, some with black oxide coating, some are without.
- Steel parts are salt bath nitrided or stainless steel.
- Forend and buttstock are injection molded reinforced polymer.
- 2.9 lbs w/o magazine.
- Color: Stealth Grey
