VERY RARE ! RUGER 10/22 TEK FULL AUTO REPLACEMENT PARTS SET PLUS TEK GUNSMITH 10/22 RIFLE MANUAL..THESE PARTS HAVE NOT BEEN AVAILABLE SINCE THE LATE 70'S ..CLASS II FULL AUTO RUGER 10/22 TEK REPLACEMENT PARTS..COMPONENTS TO REPLACE KEY SELECTFIRE PARTS FOR SELECT FIRE RUGER 10/22..ALTHOUGH MANUAL DETAILS PARTS MANUFACTURE AS WELL AS INSTALLATION THE TEDIOUS TIME CONSUMING LABOR INTENSIVE PARTS MANUFACTURING PROCESS IS TAKEN CARE OF FOR YOU ! MANUAL ALSO INCLUDES "TWEAKING" FITTING INSTRUCTIONS TO MAKE INSTALLATION EASIER ! GET YOURS NOW WHILE YOU STILL CAN HAVE THESE VALUABLE PARTS ! ..ALL NFA RULES APPLY
$190
AK47 Full Auto Bolt Assy + Fire Control Combo Set $250
AR-15 to M-16
The fixture is a drilling template made of machined steel that properly places the hole above the selector for the GI auto sear pin. A bolt is used to hold the fixture in place and the top of the fixture is aligned parallel with the top of the receiver to align sear pin hole. There is a washer that is used to allow the fixture to clear the "selector stops" on the receiver. There is still a small amount of milling that has to be done to allow for clearance for the sear in the receiver but that is explained in the fixture instructions and may be done with a dremel or on a drill press. $80.00
Semi to Full Auto AK-47
The fixture is a drilling template made of machined steel that properly places the sear pin hole in the receiver for the auto sear pin. There are machined steel pins that are used to hold the fixture in place on the receiver. There is still a small amount of dremeling that has to be done to the carrier rail to allow for clearance for the trip in the receiver but that is explained in the fixture instructions, and may be done with a dremel. Since the holes are two different sizes on the AK-47 a bushing is provided for the right side hole to guide the bit that is the same size as the bit to eliminate the need to center punch this hole $90
AK47 Full Auto Bolt Assy + Fire Control Combo Set $250
AR-15 to M-16
The fixture is a drilling template made of machined steel that properly places the hole above the selector for the GI auto sear pin. A bolt is used to hold the fixture in place and the top of the fixture is aligned parallel with the top of the receiver to align sear pin hole. There is a washer that is used to allow the fixture to clear the "selector stops" on the receiver. There is still a small amount of milling that has to be done to allow for clearance for the sear in the receiver but that is explained in the fixture instructions and may be done with a dremel or on a drill press. $80.00
Semi to Full Auto AK-47
The fixture is a drilling template made of machined steel that properly places the sear pin hole in the receiver for the auto sear pin. There are machined steel pins that are used to hold the fixture in place on the receiver. There is still a small amount of dremeling that has to be done to the carrier rail to allow for clearance for the trip in the receiver but that is explained in the fixture instructions, and may be done with a dremel. Since the holes are two different sizes on the AK-47 a bushing is provided for the right side hole to guide the bit that is the same size as the bit to eliminate the need to center punch this hole $90