G19 slide

[Justin P.]

Having issues with a aftermarket g19 slide when shooting if I pin trigger to the rear the slide will sometimes not return to battery. As I slowly release to reset the trigger the slide will fall into place any tips greatly appreciated thanks feel free to text at 770 369 5885

 

[mhg]

Check the firing pin install. I had a Glock years ago that had similar problem.
The cup and sleeve were not assembled correctly. Mine would also move the slide rearward
just slightly while pulling the trigger, just before releasing the firing pin.

 

[Justin P.]

Check the firing pin install. I had a Glock years ago that had similar problem.
The cup and sleeve were not assembled correctly. Mine would also move the slide rearward
just slightly while pulling the trigger, just before releasing the firing pin.

Will do thanks!!!

 

[LongNose]

I had a similar issue with p80build, mine turned out to be the guide rod spring, put an 18lb spring in it and issue was fixed.

 

[Justin P.]

I had a similar issue with p80build, mine turned out to be the guide rod spring, put an 18lb spring in it and issue was fixed.

I'll look into that thank you