My advice is to just spend big once. Get a 750xl with an RT1500, m die, and a swage it. You’ll hate your life after you case prep anything more than 1k of 223 in one sitting. Use the above on a “case prep” tool head, then have a separate tool head do actually load. Your production will increase, your hands won’t hate you, and you won’t have brass shavings everywhere. This is approx 3k (I wasn’t counting) rounds that took all but 6 hours from dirty brass, to wet tumble,, dry, lube/trim/swage, retumle, dry, and load. You’re going to upgrade eventually, so you might as well start with the stuff you’ll end up with and save the money in the long run.
-
If you are having trouble changng your password please click here for help.
I know nothing
- Thread starter Bulldog Man
- Start date
One thing you non Reloaders should understand. Reloaded ammunition is not an inferior ammunition. Our plinkers are usually about the same quality as factory ammo. But our hunting & precision target loads if tuned to the rifle would be hard to beat.
