Item Name: FS 10mm, 45, 44, 9mm. Factory ammo, reloading components and dies
Location: Near I-85 and 316
Zip Code: 30044
Item is for: Sale Only
Sale Price: 300
Willing to Ship: No
Bill of Sale Required?: No
Item Description: I no longer own a 10mm or 45 ACP handgun and have not used my reloading setup in 15 years. I want to sell everything in a single transaction. If this does not sell at $300 I am going to keep reducing the price until it does, not sell ammo or components for a single caliber individually.
For $300 you will get 491 rounds of factory ammo, approximately 6000 pieces of brass, 2500 bullets, 900 primers and dies for 9mm, 10mm and 45 ACP.
I am not interested in any trades at this time.
I live in Lawrenceville but am frequently near Ellijay or Dawsonville on weekends.
If you are interested please contact me via private message.
Summary
10mm:
110 rounds of factory 10mm ammo + 38 rounds of 40 S&W
18 pounds of brass, approximately 1600 pieces
About 1500 bullets, of which only 300 are cast
RCBS carbide die set with Dillon crimp die
900 – Federal 150 large pistol primers
45 ACP:
343 rounds of factory ammo
10 pounds of brass, approximately 750 pieces
About 900 bullets, mostly cast
RCBS carbide die set with Dillon crimp die
9mm:
21.8 pounds of once fired brass, approximately 2700 pieces
RCBS carbide die set with Dillon crimp die
44:
13.5 pounds of once fired brass, approximately 800 pieces.
The only handgun caliber I reloaded extensively was 10mm. Some of those cases might have been fired a few times. The 45 cases were probably fired at most a couple of times. While I used to save the brass I never started reloading 9 or 44 so all of it is once fired. All the cast bullets listed were purchased, I never started casting my own. All the brass should be inspected before use.
Detailed description
10mm factory ammo:
44 – Remington 180 grain JHP
38 – Remington 180 grain JHP
8 - Doubletap 200 grain JHP
20 – Winchester 175 grain JHP
40 S&W factory ammo:
38 – Winchester 180 grain FMJ
10mm bullets:
1050 – Remington 155 grain JHP
280 - Georgia Arms 180 grain cast
95 - Hornady 155 gr XTP
95 - Hornady 180 gr XTP
20 - Hornady 200 gr XTP
10mm Misc:
RCBS Carbide 3 die set
Dillon 10mm crimp die
900 – Federal 150 large pistol primers
10mm Brass:
18 pounds - approximately 1600 pieces
The brass is mixed headstamps with the big majority being PMC. I was reloading on a single stage press so the brass is sorted into separate bags depending on whether it was fresh off the range, tumbled, sized and deprimed or expanded. I did not keep track of how many times it had been reloaded but most of it is once or twice fired. My favorite load was a cast bullet @1000 fps which did not stretch the brass much. I never had a split case.
45 ACP factory ammo:
200 – Remington 230 grain FMJ
55 – Winchester 230 FMJ
35 – Winchester 185 JHP Silvertips
16 – Federal 185 grain JHP Hydrashocks
37 – Federal 165 grain low recoil JHP Hydrashocks
45 ACP bullets:
500 – 200 grain SWC cast
215 – 230 grain round nose cast
120 – 185 SWC cast
75 – Remington 185 grain SWC FMJ
Misc:
RCBS Carbide 3 die set
Dillon 10mm crimp die
45 ACP Brass:
10 pounds - approximately 750 pieces
The brass is mixed headstamps. I was reloading on a single stage press so the brass is sorted into separate bags depending on whether it was fresh off the range, tumbled, sized and deprimed or expanded. I quit reloading shortly after starting to reload 45 so most of this has only been fired once or twice.
9mm Misc:
RCBS Carbide 3 die set
Dillon 10mm crimp die
9mm Brass:
21.8 pounds - approximately 2700 pieces
The brass is mixed headstamps. I quit reloading before using any of this so it is all once fired but some might be tumbled or deprimed.
44 brass:
13.5 pounds – approximately 800 pieces
All once fired. There might be 50 or 100 44 special cases but most of it is 44 magnum.
Pictures:
Location: Near I-85 and 316
Zip Code: 30044
Item is for: Sale Only
Sale Price: 300
Willing to Ship: No
Bill of Sale Required?: No
Item Description: I no longer own a 10mm or 45 ACP handgun and have not used my reloading setup in 15 years. I want to sell everything in a single transaction. If this does not sell at $300 I am going to keep reducing the price until it does, not sell ammo or components for a single caliber individually.
For $300 you will get 491 rounds of factory ammo, approximately 6000 pieces of brass, 2500 bullets, 900 primers and dies for 9mm, 10mm and 45 ACP.
I am not interested in any trades at this time.
I live in Lawrenceville but am frequently near Ellijay or Dawsonville on weekends.
If you are interested please contact me via private message.
Summary
10mm:
110 rounds of factory 10mm ammo + 38 rounds of 40 S&W
18 pounds of brass, approximately 1600 pieces
About 1500 bullets, of which only 300 are cast
RCBS carbide die set with Dillon crimp die
900 – Federal 150 large pistol primers
45 ACP:
343 rounds of factory ammo
10 pounds of brass, approximately 750 pieces
About 900 bullets, mostly cast
RCBS carbide die set with Dillon crimp die
9mm:
21.8 pounds of once fired brass, approximately 2700 pieces
RCBS carbide die set with Dillon crimp die
44:
13.5 pounds of once fired brass, approximately 800 pieces.
The only handgun caliber I reloaded extensively was 10mm. Some of those cases might have been fired a few times. The 45 cases were probably fired at most a couple of times. While I used to save the brass I never started reloading 9 or 44 so all of it is once fired. All the cast bullets listed were purchased, I never started casting my own. All the brass should be inspected before use.
Detailed description
10mm factory ammo:
44 – Remington 180 grain JHP
38 – Remington 180 grain JHP
8 - Doubletap 200 grain JHP
20 – Winchester 175 grain JHP
40 S&W factory ammo:
38 – Winchester 180 grain FMJ
10mm bullets:
1050 – Remington 155 grain JHP
280 - Georgia Arms 180 grain cast
95 - Hornady 155 gr XTP
95 - Hornady 180 gr XTP
20 - Hornady 200 gr XTP
10mm Misc:
RCBS Carbide 3 die set
Dillon 10mm crimp die
900 – Federal 150 large pistol primers
10mm Brass:
18 pounds - approximately 1600 pieces
The brass is mixed headstamps with the big majority being PMC. I was reloading on a single stage press so the brass is sorted into separate bags depending on whether it was fresh off the range, tumbled, sized and deprimed or expanded. I did not keep track of how many times it had been reloaded but most of it is once or twice fired. My favorite load was a cast bullet @1000 fps which did not stretch the brass much. I never had a split case.
45 ACP factory ammo:
200 – Remington 230 grain FMJ
55 – Winchester 230 FMJ
35 – Winchester 185 JHP Silvertips
16 – Federal 185 grain JHP Hydrashocks
37 – Federal 165 grain low recoil JHP Hydrashocks
45 ACP bullets:
500 – 200 grain SWC cast
215 – 230 grain round nose cast
120 – 185 SWC cast
75 – Remington 185 grain SWC FMJ
Misc:
RCBS Carbide 3 die set
Dillon 10mm crimp die
45 ACP Brass:
10 pounds - approximately 750 pieces
The brass is mixed headstamps. I was reloading on a single stage press so the brass is sorted into separate bags depending on whether it was fresh off the range, tumbled, sized and deprimed or expanded. I quit reloading shortly after starting to reload 45 so most of this has only been fired once or twice.
9mm Misc:
RCBS Carbide 3 die set
Dillon 10mm crimp die
9mm Brass:
21.8 pounds - approximately 2700 pieces
The brass is mixed headstamps. I quit reloading before using any of this so it is all once fired but some might be tumbled or deprimed.
44 brass:
13.5 pounds – approximately 800 pieces
All once fired. There might be 50 or 100 44 special cases but most of it is 44 magnum.
Pictures:
DISCLAIMER: Always comply with local, state, federal, and international law. The Outdoors Trader does not become involved in transactions between parties. Review our
Privacy Policy
and
Terms of Use
for more information.