Item Relisted! FS Daniel Defense Delta 5 Bolt Action with 2 interchangeable Barrels (308 20" and 6.5...

[Gerry Summey]

Daniel Defense Delta 5 Bolt Action with TWO interchangeable Barrels (308 20" and 6.5 CM 24")

Like New, bought new in 2019, 308 shot less 50 rds, 6.5 CM not shot, comes with two 5rd mags, manuals and boxes.
Scope, Rings and Bipod NOT included

Barrel # 1 - 308 Win / 7.62x51mm NATO, 20" Heavy Palma; User-interchangeable, proprietary steel cold hammer forged to contour, 1:10" RH twist and 5/8x24 threaded with Thread Protector

Barrel # 2 - 6.5 Creedmoor, 24" Factory-Set Headspace, Fast Installation, Cold Hammer Forged, Cobalt Cerakote, Heavy Palma Barrel Profile, 1:8” RH Twist and 5/8x24 threaded with Thread Protector. Use factory Delta 5 308 stock and bolt with 6.5 CM

To change barrels, all you need to do is remove the barreled action, remove the barrel nut, install the new barrel, tighten the barrel nut to the proper torque and then re-install the entire barrel/action assembly into the stock. With the included ½” barrel nut wrench, you can swap barrels in minutes.

With Kit:
- Included Reaction Rod (SKU 17-088-07267 MSRP $65) with a Key (put rod in vise so change barrel without removing scope)
- Barrel Nut Adapter
Need:
- 1/2" Torque wrench capable of 55 ft/lbs for Barrel Nut
- IP30 Wrench with a fix it stick limiter max at 60 in/lbs for Chassis screws (#10-32) to hold action in place

DELTA 5® 24" 6.5 Creedmoor, 1:8", HPALMA

Our cold hammer forged barrels are known to be as accurate and long lasting as any you’ll find. And now, you can easily switch the caliber of your DELTA 5® or DELTA 5® Pro with this barrel conversion kit. We’ve taken the modularity found in our ARs and adopted it for the bolt-action rifle by...

danieldefense.com

• Adjustable single stage Timney Elite Hunter with two position safety (1.5 – 4 lbs)
• Mechanically bedded stainless steel action with integral recoil lug
• Picatinny Scope Base: 20 MOA / 5.8 MRAD of elevation w/four #10-32 bolts
• Bottom Metal: Integrated with pillars and barrier stop
• Ergonomic Stock: Constructed of carbon-fiber-reinforced polymer
• Adjustable Cheek Riser: For preferred height, yaw, and drift
• Configurable Buttstock: Offers length of pull and butt pad height adjustments
• Three-lug bolt w/60 degree throw & floating 5/16 - 24" removable bolt knob
• Carbon-fiber reinforced polymer
• 11 total M-LOK points along forend w/1 point on bottom of buttstock
• QUICK DETACH: 3 M-LOK QD sling points
• Two position safety

Comes with two 5rd mags - Magpul PMAG 7.62 AC - ACIS Short Action single feed (5 Round MAG549 & 10 rnd Mag579); Compatible w/short action AICS (Accuracy International Chassis Systems) pattern bottom metal & cartridges built on 0.470″ case head - 7.62×51/.308 Win, 7mm-08 Rem, 6.5mm CM & others; Accepts COL up to 2.86″

DD 100% satisfaction guarantee against defects in original materials and workmanship.

• Pickup free or Ground Shipping $40 to your FFL of choice
• Any questions feel free to call or text me at 678-591-5527. I am located in Cumming GA.

 

[Gerry Summey]

This item has been relisted. The new listing can be found at https://www.theoutdoorstrader.com/t...terchangeable-barrels-308-20-and-6-5.3086306/.