I have 6 Klus 300watt Led drivers, 120v input to 24volt output. This is a Nema 3R enclosure (ok for outside). So….if you add up the wattage of the #of 24v lights and do not exceed 300w, you won’t overload it. I think 300W might be the biggest availible. You would wire the lights in
(parallel). Be careful Of long wire runs which will reduce your voltage at light because of the voltage drop or loss, if so use larger conductor.
Other features, 5amp input over current protection
15amp output “. “
4-½in knockouts for conduits
With outdoor landscape lighting the money is in the driver, unless you go crazy on the lights.
These are new without box or docs, list on Amazon for $175
(parallel). Be careful Of long wire runs which will reduce your voltage at light because of the voltage drop or loss, if so use larger conductor.
Other features, 5amp input over current protection
15amp output “. “
4-½in knockouts for conduits
With outdoor landscape lighting the money is in the driver, unless you go crazy on the lights.
These are new without box or docs, list on Amazon for $175
