LED bulb replacement. WTF is going on??

[rOmiLaYu]

And you absolutely must radius your canooter valve.

 

[Eglock86]

this is what i want to go away. As of now it comes one everytime I turn my blinker on

Still have to clear it normally although the light will probably go out.

 

[Willy Leadwell]

So Willy Leadwell if I just replace the the flasher will it kill the code on the dash?

Yes, it should. Just as it would if you replaced a blown bulb.

 

[Eglock86]

Thank you sir, your information has been very helpful

Yes, it should. Just as it would if you replaced a blown bulb.

 

[Willy Leadwell]

Thank you sir, your information has been very helpful

Looking in to this a little more, it looks like 2011 & up trucks do not have a flasher relay, but a lighting control module that controls all lighting functions. Adding load resistors or reprogramming the computer may be your only options.

 

[Eglock86]

Just a little update for anyone searching for this in the future, they stopped putting flasher modules in silverados in 2006, so if you want to put an led bulb in anything that blinks you MUST put resistors (1 per bulb) in the wiring.

 

[potenza]

More trouble than it's worth, it's called a BCM ( body control module) and expensive to replace if you burn it out. Just put a bulb in it and move on. I also have led inside of my truck but have looked at the turn signal and yes you must put a resister in it to work correctly

 

[YOTESHOOTER]

Will the LED Flasher make the windshield wipers go faster or slower??? Or will the LED Flasher fluid compensate for this also???

 

[Lobo1]

No worries I used blinker fluid.

Make sure you get LED compatible Blinker Fluid. Conventional blinker fluid will not work with LED bulbs.

 

[SouthernSlammed]

Check out Diode Dynamics, for all your LED lighting needs!!! They should be able to help and answer any questions for you.