• ODT Gun Show & Swap Meet - May 4, 2024! - Click here for info

Need help with my 2007 Wrangler unlimited (misfire issues)

Not sparking when commanded ?
Or no command signal to the coil ?

I had some intermittent issues with my 91 mustang engine that's in my 74 bronco and a different computer fixed it



Sent from my iPhone using Tapatalk

Pretty sure it's the pcm, but we'll find out soon. Only tried 2 coil packs, and haven't tested all the wires to coil pack yet.
 
New PCM fixed the issue. Now I can focus on modifications.

Stage 1.
Hard top, windshield, side steps, new radio and new carpet.

Stage 2.
4wd conversion

Stage 3
Lift, tires, and gears.

Should be a fun project for the rest of the year and 2018.
 
Drove a little over 100 miles round trip to get the hard top. The old wrangler ran well, but did throw a code for emissions but no misfire code. It has a small exhaust leak just before the catalytic converter. Needs s new gasket.

Did forget how much power the 3.8l doesn't have. Not a great interstate engine.

IMG_7454.JPG
IMG_7455.JPG
 
Drove a little over 100 miles round trip to get the hard top. The old wrangler ran well, but did throw a code for emissions but no misfire code. It has a small exhaust leak just before the catalytic converter. Needs s new gasket.

Did forget how much power the 3.8l doesn't have. Not a great interstate engine.

View attachment 1301594 View attachment 1301595

The power struggle is real!

I ended up trying to trim as much weight as possible, switching to soft top and losing the spare and spare mount. Gained 1 MPG.
 
The power struggle is real!

I ended up trying to trim as much weight as possible, switching to soft top and losing the spare and spare mount. Gained 1 MPG.

Just going from no top to the hard top was actually really noticeable. I did average 18.1 mpg, but I hate down shifts going up hill.
 
Progress being made.

- Hard top
- 3.5” pro comp lift
- Rusty’s control arm system in from
- 35x12.5r18 on Sahara wheels
- ARB front bumper
- Barricade Rear bumper
- swapped both front 2wd sxle and rear dana 44 with a matching set of dana 44 and dana 30 axles from another jku.
- LED front and rear lights.

Still needed
- Transfer Case
- drive shafts
- Linkage and shifter
- 4x4 cross member
- Alignment.

EE335498-65F6-4954-9A2D-60CBEC79F74A.jpeg
D62551A3-7312-4C22-9302-ABD94C1C0F90.jpeg
AE2753B9-8200-4A17-A27B-56F4E87510EE.jpeg
269A280D-37F5-443A-906B-E9AF2D7C33EF.jpeg
C07FD317-9F34-4776-941C-C899B19A4D16.jpeg
 
Back
Top Bottom