Need help with the Lee auto loader

[41mag]

No haven’t figured it out yet.. this one since used came with one disc and I think it has 6 holes.. it’s the thick disc

Let me dig around and look At what i have. I will hit you up, text by morning time . I just gotta remember where it is and dig it out.
I think i have a set of disks you can have….6-8 disks ?? If i can find. Pretty sure i can.

 

[medium187mph]

I’d also recommend reaching out to Lee...

You may be surprised how they will take care of you

 

[Jblue]

I used it with 5 grains of powder as well. I would get variances of 4.8-5.1. But I didn't have a problem setting it to five.

 

[Nuke And Juke]

Try this

https://www.amazon.com/LEE-PRECISION-90792-Adjustable-Powder/dp/B00162RPDG

 

[Freshly Minted Georgian!]

BDR1 I can 3D print you some inserts as well so you get the specific charge you are looking for. PM me if you want to go that route.

 

[BDR1]

Found a powder that measured correctly.. but titegroup measured at 5.5.. that’s way too much for 115 grain.. I don’t know how to adjust the drop with this one.. is there a way?

 

[41mag]

Try this

https://www.amazon.com/LEE-PRECISION-90792-Adjustable-Powder/dp/B00162RPDG

That is what i replaced my disk with BDR1
this gives infinite powder measure with any powder, within reason .

 

[Freshly Minted Georgian!]

That adjustable insert that Nuke And Juke linked or custom collets 3d printed or fill with a lead slug and drill it out to the ID that works for your specific powder. Whatever is easiest for ya brother.

 

[BDR1]

Lol.. now that a powder measures correctly ( diffrent powder) now my primers won’t feed.. what is wrong with me.. lol

 

[Paxdad]

I am using the disc with the 4.3 hole. It is consistently dropping 4.2-4.3 grains of WSI231.