Red Jacket Firearms ZK-22 Bullpup Stock

[Tony2X]

Close your mouth bro.

 

[Proximal]

^ He is shooting right handed so no worries.

 

[atl_adam]

Looks good! Does it accept a bull barrel? Such a toss-up between this and the HTA 90/22.

 

[AR15tocrat]

It will accept a bull barrel, you just have to be aware of barrel length so it's not considered a sbr. If I'm not mistaken you need a minimum barrel length of 18.5 inches to meet regulations.

 

[xdmatt]

Looks good! Does it accept a bull barrel? Such a toss-up between this and the HTA 90/22.

I'd rather have the HTA, since it's about as close as I'll get to a PS90. But, it seems to be in perpetual delay. Worse than when RJF announced the ZK-22.

 

[atl_adam]

I'd rather have the HTA, since it's about as close as I'll get to a PS90. But, it seems to be in perpetual delay. Worse than when RJF announced the ZK-22.

I'm really trying to hold out for the HTA since Andy and his group have been nothing but helpful and forthcoming (unlike the group at RJF). I may run the Archangel Nomad kit for a few months until my HTA kit arrives.

 

[AR15tocrat]

I would research that before you go slapping a 16 inch barrel on there. Watch the rjf install video and they will tell you that you are wrong. Not trying to be an a$$ but people need to know so that they aren't faced with some unfortunate consequences.

 

[Laxguy59]

sixteen inches minimum barrel length for rifles.

the 16" barrel brings it under the 26" overall length requirement.

 

[atl_adam]

I would research that before you go slapping a 16 inch barrel on there. Watch the rjf install video and they will tell you that you are wrong. Not trying to be an a$$ but people need to know so that they aren't faced with some unfortunate consequences.

I completely agree. If you fit the 16" barrel on the RJF kit you're going to be up a creek without a paddle. The 18.5" will keep you on the right side of the law.

 

[AR15tocrat]

http://www.redjacketfirearms.com/in..._id=67&option=com_virtuemart&Itemid=2