Semper Paratus Arms will be returning once again to Georgia! This course is recognized as one of the best and most comprehensive armorers courses available in the country. So, don't miss out on this opportunity!
This is an open enrollment course.
Semper Paratus Arms will be doing a 2 day AR15 Armorer Course in LaGrange, GA at FMJ Armory. This course will cover history and development of the AR15, proper assembly/disassembly procedures, component selection, technical specs, diagnosing and troubleshooting malfunctions and more. Additionally students will receive some cool swag courtesy of FMJ Armory, Warrior Industries, LLC and Semper Paratus Arms.
Additional information can be found here: https://www.primaryandsecondary.com/event/semper-paratus-arms-2-day-ar15-armorer-course-2/
Course registration and payment will be conducted through- http://www.semperparatusarms.com/course-schedule-registration/
NOTE: there is an option to split your payment. Half at time of registration and balance prior to class date.
PLEASE READ: When you make payment through the website, please write "LaGrange" in the note to seller section.
Dates: October 7/8, 2017
Time: 0900-1730
Location: FMJ Armory
2221 W Point Rd
Lagrange, GA
www.fmjarmory.com/
Cost: 350.00
NOTE: This class will not be eligible for GA POST credit. GA POST requires that eligible courses be taught at a law enforcement facility.
STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.
Additionally there is a new "minimalist" tool kit for the course.
All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.
The complete kit is only necessary for those building a weapon during the course.
Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
Nylon and Brass Hammer (1 oz.)
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
Minimalist Tool List
Glock Punch
Nylon and Brass gun smithing hammer. (1 oz)
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......
Overview
This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....
Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.
The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.
TD 1
-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)
TD 2
-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance
Instructor Bio
This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
www.semperparatusarms.com
www.facebook.com/SemperParatusArms
www.sionicsweaponsystems.com
https://www.facebook.com/SionicsWeaponSystems
This is an open enrollment course.
Semper Paratus Arms will be doing a 2 day AR15 Armorer Course in LaGrange, GA at FMJ Armory. This course will cover history and development of the AR15, proper assembly/disassembly procedures, component selection, technical specs, diagnosing and troubleshooting malfunctions and more. Additionally students will receive some cool swag courtesy of FMJ Armory, Warrior Industries, LLC and Semper Paratus Arms.
Additional information can be found here: https://www.primaryandsecondary.com/event/semper-paratus-arms-2-day-ar15-armorer-course-2/
Course registration and payment will be conducted through- http://www.semperparatusarms.com/course-schedule-registration/
NOTE: there is an option to split your payment. Half at time of registration and balance prior to class date.
PLEASE READ: When you make payment through the website, please write "LaGrange" in the note to seller section.
Dates: October 7/8, 2017
Time: 0900-1730
Location: FMJ Armory
2221 W Point Rd
Lagrange, GA
www.fmjarmory.com/
Cost: 350.00
NOTE: This class will not be eligible for GA POST credit. GA POST requires that eligible courses be taught at a law enforcement facility.
STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.
Additionally there is a new "minimalist" tool kit for the course.
All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.
The complete kit is only necessary for those building a weapon during the course.
Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
Nylon and Brass Hammer (1 oz.)
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
Minimalist Tool List
Glock Punch
Nylon and Brass gun smithing hammer. (1 oz)
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......
Overview
This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....
Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.
The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.
TD 1
-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)
TD 2
-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance
Instructor Bio
This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
www.semperparatusarms.com
www.facebook.com/SemperParatusArms
www.sionicsweaponsystems.com
https://www.facebook.com/SionicsWeaponSystems
