Slide Machining Atlanta

[Rgc]

Having difficulty getting responses from the past GS’s used to do work (G Firingline zero responses in many attempts)….

I have a. 1911 stainless slide that I need a simple cut and ball detents put in for a Brazos slide racker. Quick turnaround needed (it’s a simple job) any recommendations?

 

[Jackjam]

I had my slide milled for an optic at https://zrtacticalsolutions.com/ was in and out in 1 day. Price was competitive also.

 

[Braxton1]

Let me check my dovetail cutters to see if I have that one (0.375 X 60 degree)....

 

[Rgc]

So nobody able to help direct me to a local machine shop to do this?

 

[4ssss]

So nobody able to help direct me to a local machine shop to do this?

You can't just give it to a machine shop or a guy with a Bridgeport, as simple as this job is. Well, I guess you could if you can find someone that wants to open himself up for the liability. You do need to have an FFL to do any machine work on a gun.

How to Become a Licensed Gunsmith

Gunsmiths repair guns, but first they must complete training and obtain the proper license from the Bureau of Alcohol, Tobacco, Firearms and Explosives. Here's how to obtain your license to become a gunsmith.

work.chron.com

 

[Rgc]

You can't just give it to a machine shop or a guy with a Bridgeport, as simple as this job is. Well, I guess you could if you can find someone that wants to open himself up for the liability. You do need to have an FFL to do any machine work on a gun.

How to Become a Licensed Gunsmith

Gunsmiths repair guns, but first they must complete training and obtain the proper license from the Bureau of Alcohol, Tobacco, Firearms and Explosives. Here's how to obtain your license to become a gunsmith.

work.chron.com

The machine is on the slide. It’s not an FFL controlled part.

 

[Rgc]

Any other suggestions on a local machining shop for a quick slide cut?

 

[Red Squirrel 556]

Neil at Mid GA Gunsmithing in Barnesville.