Nope, not a commercialy built trailer. It's home made with a very old front axle from a car. It's for sure 4.25. Same kind of axle one would use on an old gasser drag car.
Have you plugged in any generic obd2 code scanner? Could be the obd port has no power (check fuses) or the can bus on it is down. Dealer or German repair shop can fix.
If you want to keep it tell them and have them write you a check (after you get the written estimate). If it does get a totaled title after that you can repair it and get it inspected. Branded with a "salvage repaired title"
You have to document all parts new and used if allowed by your...
Can be totaled and kept if you do the buy back (or give you a check for repairs based on the estimate from shop) If not run in the state, don't worry about it.
My car is a rebuild salvage from another state. You can repair it yourself, documentation is key, you can use salvage yard parts with the donor vehicle Vin information. Pre repair pics and assessment from the insurance repaire shop. Make all repairs and take it to an inspection center before...
Can't get a title anymore. All the BOS together with any previous owners registration records should be good. Had to show copies of the previous owners registrations to gwtbit my name with my the BOS. Again, no title just a new registration receipt. You might have to get it in your name first...
Finally, a copy of a shop manual. There is a relay, think they had the same people that made the IPCM for Nissan make this one too.
Don't forget Ford put their fuel pump control on the bottom of F150s for failure too. All about money.
I thought mine had no relay too till I bought a spare module and followed all the circuits backwards. What do you know, there's a relay in there and a fairly low amp one at that!
Out of curiosity do you use Kroger gas stations to refuel from? My 2015 Silverado will shut off quickly within a few...
I guess the fuel pump isn't dead right?
Wife's Nissan is like this, module has fuse but no power till an internal relay (deep in the module) is turnes on first. Frustrating because I didn't want to cut a hole in the floor and the tank was full. I finally got a shop manual from ebay and found...
I agree. Some LED replacements do not have the LEDs in the same location/direction as the halogen counterparts and the light is either focused or scattered accordingly by the reflectors. No standard with some manufacturers. Just what I have found and everyone will have different opinions like...
Correct! Half these people don't think that they have to adjust the lights (junk or not). Pass a bunch of them every morning. I'm using the $60 Amazon's for trial and error till I get some that work well with the european e-codes I got from the yard. 30 day returns with no questions asked. All...
I put some Sealight H4 LED headlights in my 05 Jetta. Working well after I aimed them but they need to be tweaked a little more. The only issue I had was they back fed into the light switch/fog lights and stayed high beams all the time till I reconfigured the fog relay. Much better lights with...