Search results for query: *

  1.

    Anyone know who cuts rail pocket openings for FSB? See Pics..

    I’ve done a few, a hacksaw and a few decent files are all you need, bigger problem is touch up. Easier to cerakote the rail after. If you don’t care about looks paint or a black touch up pin are also doable. Biggest concern is making sure you will be able to reseat the the taper pins. Often...

  2. Glock trigger

    Or I’ll swap you the trigger out of my dagger for your stock Glock one

  3. Glock trigger

    What gen Glock do you have. the PSA daggers use the S&W design but they are only compatible with Gen 3. Most of the reputable aftermarket brands are using the Glock design
  4.

    AR Buffer questions

    No personal experience with the Rugers but could it be a rifle length spring like you’d find in an A2 stock? Otherwise I’d suggest calling ruger. They have a bad habit of doing there own thing when it comes to some of their ARs as opposed to using industry standard parts. As an aside is there...

  5. How to convert AKV to AK Rifle

    I doubt you’ll get a barrel from PSA if they don’t currently offer it. As far as pinning a muzzle device. Im not aware of this conversion being done on an AKV specifically however people have done the P&W to Draco and various 7.62 pistols for a long time now. Check CNC warrior and AK builder...
  6.

    Remington 870 question.

    Send me a PM if you don’t mind
  7.

    Remington 870 question.

    Finally got ahold of Remington, they said it’s the 8” screw for this stock. The 10 is for the earlier style polymer stock. Thanks for the reply
  8.

    Remington 870 question.

    Good morning all, I am currently in the process of saving a used 870 I picked up from my LGS. It appears the previous owner had some unique “taste” in regards to aftermarket furniture. Im in the process of finding a replacement stock and forend . My question is about the length of the...

  9. Can I remove a factory pin and welded muzzle device from my AR?

    I don’t know about D Wilson but I’ve had good luck with a DeWalt drill and some patience 😂, really the quality of the P&W has the most to do with the removal. Really nasty home builder welds where you can’t determine the center or various filler metals can be tedious. It’s more what you or your...

  10. Mineral Spirits on Firearm Non-Metal Parts

    I’ve always heard Ultrasonic is not good on springs

  11. AK guys this one is for you. Barrel threading

    True minimum is about 0.4935, that’s gonna leave it about 9 thou short on each side. But it should create a small bit of thread that I could then pin ?

  12. AK guys this one is for you. Barrel threading

    So I picked up an SAR-1 recently and am looking into having the barrel threaded. Unfortunately the correct 14x1LH won’t be possible due to the turned down diameter at the muzzle. That being said I’m looking into 1/2X28. The barrel OD is coming out to ~0.475 I know the 1/2X28 has a min diameter...

  13. CERAKOTE QUESTION!!!

    What would you use on polymer parts like stocks grips, etc

  14. CERAKOTE QUESTION!!!

    I’ve heard that cerakote can cure at low temps, but the time to cure is much much longer.

  15. Chop and Thread Barrel Recommendations

    Could always send it in to ADCO

  16. AK Gas Tube handgaurd

    It’s just a magpul rail panel that has had longer bolts run through the gas vent holes. But if you want something less ghetto this is from https://warsawwoodco.com/mlok-panel/

  17. AK Gas Tube handgaurd

  18. AK Gas Tube handgaurd

    Most all AK rails are gonna have the gas tube portion attach to a lower Handguard to prevent wobble. Khyber customs made a gas tube cover at one time that was slotted and I have seen people attach stuff to those you could try that or if you wanna be real crude take the mlok accessories you want...

  19. Question about smiths working on 1911s.....

    DO NOT TAKE ANYTHING TO PEDRO ORTIZ, I wouldn’t let him work on a Red Ryder. If your willing to go to the Savannah area and you need 1911 work done I’d call Adam at Dixie Triggers, he actually
  20.

    NORINCO MAK 90 AND MAGPUL ZHUKOV AK STOCK

    If anything modify the stock that you can replace for ~100 bucks, you can’t replace a factory installed Chinese trunnion. It will also be easier to remove plastic in a more controlled manner
Back
Top Bottom