• ODT Gun Show this Saturday! - Click here for info and tickets!

Search results for query: *

  1. Smith & Wesson 63-3 Center pin removal help

    It was indeed. Fortunately I was familiar with that. I had just never run in to an instance with the center pin stuck in the extractor. I got it out now though. Thanks for the response

  2. Smith & Wesson 63-3 Center pin removal help

    Thanks I will look in to getting the tool or making one for future use. I was able to get the extractor rod off no problem but the center pin wasn't coming out of the extractor. I got it now. Thanks for the reply

  3. Smith & Wesson 63-3 Center pin removal help

    I got it out. I figured since I couldn't find instructions on the 22 models I would look at other j frames and I found a video on a 38 special j frame that showed how it should have come out. It should have just slid right out but it was bent at the tip and was hanging up on the inside of the...

  4. Smith & Wesson 63-3 Center pin removal help

    I know not to use pliers but apparently the previous owner didn't. I just got it in a trade. The cylinder was stuck shut when I got it and it is quite obvious they attempted to get it open anyway possible. Also I have searched Youtube with no luck on the center pin removal. I know that the...

  5. Smith & Wesson 63-3 Center pin removal help

    Can anyone tell me how to remove the center pin out of the extractor on a Smith and Wesson 63-3. It is bent and I need to replace it. Thanks in advance.

  6. Colt 1903 Failure to Extract

    I tried that and went and tested it out. Same result. I did take the spring and extractor out since your first response. It appears that the spring is pretty worn out, so that could be my problem. Thanks again

  7. Colt 1903 Failure to Extract

    I cleaned the chamber with a bore brush. Everything is smooth with no scuffs or anything that would possibly snag the shell casing. Could the diameter of the chamber be too large allowing the shell casing to expand too much? I would guess that wouldn't be possible because the extractor should...

  8. Colt 1903 Failure to Extract

    I have cleaned the Chamber with a brush but haven't removed the extractor and spring. It will chamber and remove an unspent round no problem. The casing is so hard to remove it is almost like it has slightly welded itself to the chamber wall. If that makes sense. I will try cleaning those parts...

  9. Colt 1903 Failure to Extract

    I just purchased a Type 1 Colt 1903 from 1904. After every shot the shell casing gets stuck in the chamber. The extractor appears to be in good shape. The case seems to be expanding in the chamber more than would be expected. It takes quite a bit of force with a wooden dowel to remove the spent...
Back
Top Bottom