Stop paying ridiculous prices on a LEGAL semi automatic FRT disconnector for your TX22. This is a full metal FRT with a mystery gift. Everyone should have one of these at a reasonable price. To my knowledge this is the absolute rock bottom price, shipped, no CC fees, or taxes. You're getting a reliable product that has been thoroughly tested and full transparency. No gunsmithing needed. 100% drop in. The FRT design has been absolutely hammered with thousands of rounds and tested more than anyone just selling batches of unknown cut FRTs from only god knows where. Important 11/4 update below. As of 11/9 the issue has been resolved.
Please read in its entirety. (multiple updates and videos below)
QA1 Notes - Tested on full size Gen 2 TORO version with a Osight K Micro. No FTE or FTF. 500rnds Federal Blue Box. All stock internals except for the FRT.
Update QA 2 - another 500rnds of Winchester Wild Cat hammered non stop (or as fast as I could reload the 2 extended mags). No FTE, FTF, light strikes. NO abnormal wear on the striker assembly. I have not cleaned the gun since day one. The slide has received some oil.
Note: The QA has been completed and everything looks normal after a 500rnd brick of Federal blue box 36grn and 500rnd brick of Winchester Wild Cat (1000rnds total QA). However, none have successfully been able to fully cycle when suppressed OR with a compensator (odd but I tried the TK one and it wouldnt work).You're on your own to get it to cycle suppressed.
Compatibility: All TX22 models but some may have cycling issues such as the Competition model. You may need to tinker with it.
The mystery gift: Can be anything from a speed loader (for standard magazines), stickers of random brands, notebook, or anything 2A related I can fit in the package.
Payment via, PayPal Friends and Family. Address in the comments section...make sure it's correct. PM for details.
Shipping: GA residents only - tracking will be provided.
UPDATE 10/9: SHIPPING Costs... Shipping is built into the price and is the lowest possible I can get. I usually use UPS as they are most reliable but they've upped their rate by $1.50. Going forward past 10/9/25 - all packages sent out will be USPS Ground Advantage. If you would like UPS, please add $1.50
Update 10/23: Additional QA 3 performed. 500brick of Remington Thunderbolt green box... Notoriously know as the worst possible ammo you can run. Again, no FTE/FTF. Gun has not been cleaned other than a wipe down with a microfiber cloth with no solvent on the feed ramp and striker block. Oiled the slide with some Lucas gun oil. While not directly related to the FRT. Should show that the TX22 is pretty reliable when functioning at this speed. Issue identified with the slide lock intermittently not locking back. Minor and I think it's due to a high spot internally on the frame. Monitor yours. Exercise caution and clear the chamber if you do not get round out and slide slock.
Probably should get my bloodwork done for elevated levels of lead. lol
UPDATE 10/24: New video uploaded. Another happy OTDer
. Suppressor testing has begun with modified parts.
UPDATE 10/26 (potentially final update): Found some Monarch .22lr at Academy. No idea they made rimfire but….I think I’ve found the Achilles heel. This trash will not run worth a damn. Bunch of stovepipes and FTL (that could be a magazine issue…I’ve been using the same since day one). I was able to get just one mag to run suppressed the whole way. The rest was inconsistent. Modified the pistol to run suppressed. Which after doing so, I do not recommend. Just too much work and money for a quick thrill unless you have the parts. I added a Lakeline recoil spring, put the optics plate back on, installed a generic dovetail optics mount, and threw an Osight K Micro on, per ChatGPT’s comparison of ‘heaviest’ RMSc optic. Which I now question its accuracy on that. Hundreds of rounds later… the Osight died lol. I’ll post a video below. I think that may be it for now. This thing has shot over 2k+ rounds (FRT and not) and I’m pretty sure my blood lead levels are twice the safe amount. I think I’ve torture tested this enough. Buy with confidence and at a low price.
!!!!!Update 11/4 [ISSUE RESOLVED] - I have identified an fitment issue with the replacement striker blocks in a produced batch. As of now I am discontinuing the sale of them until I can resolve it. HOWEVER, if you would like to tinker with one. Just let me know and I'll throw it in for free. Just DO NOT LOSE that small spring.
I have refunded all that have purchased one but if for some reason missed you, please PM me.
Update 11/9 - Striker block issue has now been resolved and material has been improved. Please add $5 to your order if you would like one.
Update 11/16 - more vids and user testimonial. If this doesnt put a smilie on your face you're dead inside. Check out the flip mag trick. Running perfectly.
Thank you to all that have purchased. Send me some videos
QA vid:
Suppressed Dead Air Mask:
---------------------------------
User vids 😎
10/15
10/15
10/24
11/16 vids
www.youtube.com
www.youtube.com
youtube.com
Check out this slick flip mag trip. Not a single FTF/malfunction.
Please read in its entirety. (multiple updates and videos below)
QA1 Notes - Tested on full size Gen 2 TORO version with a Osight K Micro. No FTE or FTF. 500rnds Federal Blue Box. All stock internals except for the FRT.
Update QA 2 - another 500rnds of Winchester Wild Cat hammered non stop (or as fast as I could reload the 2 extended mags). No FTE, FTF, light strikes. NO abnormal wear on the striker assembly. I have not cleaned the gun since day one. The slide has received some oil.
Note: The QA has been completed and everything looks normal after a 500rnd brick of Federal blue box 36grn and 500rnd brick of Winchester Wild Cat (1000rnds total QA). However, none have successfully been able to fully cycle when suppressed OR with a compensator (odd but I tried the TK one and it wouldnt work).You're on your own to get it to cycle suppressed.
Compatibility: All TX22 models but some may have cycling issues such as the Competition model. You may need to tinker with it.
The mystery gift: Can be anything from a speed loader (for standard magazines), stickers of random brands, notebook, or anything 2A related I can fit in the package.
Payment via, PayPal Friends and Family. Address in the comments section...make sure it's correct. PM for details.
Shipping: GA residents only - tracking will be provided.
UPDATE 10/9: SHIPPING Costs... Shipping is built into the price and is the lowest possible I can get. I usually use UPS as they are most reliable but they've upped their rate by $1.50. Going forward past 10/9/25 - all packages sent out will be USPS Ground Advantage. If you would like UPS, please add $1.50
Update 10/23: Additional QA 3 performed. 500brick of Remington Thunderbolt green box... Notoriously know as the worst possible ammo you can run. Again, no FTE/FTF. Gun has not been cleaned other than a wipe down with a microfiber cloth with no solvent on the feed ramp and striker block. Oiled the slide with some Lucas gun oil. While not directly related to the FRT. Should show that the TX22 is pretty reliable when functioning at this speed. Issue identified with the slide lock intermittently not locking back. Minor and I think it's due to a high spot internally on the frame. Monitor yours. Exercise caution and clear the chamber if you do not get round out and slide slock.
Probably should get my bloodwork done for elevated levels of lead. lol
UPDATE 10/24: New video uploaded. Another happy OTDer
. Suppressor testing has begun with modified parts.UPDATE 10/26 (potentially final update): Found some Monarch .22lr at Academy. No idea they made rimfire but….I think I’ve found the Achilles heel. This trash will not run worth a damn. Bunch of stovepipes and FTL (that could be a magazine issue…I’ve been using the same since day one). I was able to get just one mag to run suppressed the whole way. The rest was inconsistent. Modified the pistol to run suppressed. Which after doing so, I do not recommend. Just too much work and money for a quick thrill unless you have the parts. I added a Lakeline recoil spring, put the optics plate back on, installed a generic dovetail optics mount, and threw an Osight K Micro on, per ChatGPT’s comparison of ‘heaviest’ RMSc optic. Which I now question its accuracy on that. Hundreds of rounds later… the Osight died lol. I’ll post a video below. I think that may be it for now. This thing has shot over 2k+ rounds (FRT and not) and I’m pretty sure my blood lead levels are twice the safe amount. I think I’ve torture tested this enough. Buy with confidence and at a low price.
!!!!!Update 11/4 [ISSUE RESOLVED] - I have identified an fitment issue with the replacement striker blocks in a produced batch. As of now I am discontinuing the sale of them until I can resolve it. HOWEVER, if you would like to tinker with one. Just let me know and I'll throw it in for free. Just DO NOT LOSE that small spring.
I have refunded all that have purchased one but if for some reason missed you, please PM me.
Update 11/9 - Striker block issue has now been resolved and material has been improved. Please add $5 to your order if you would like one.
Update 11/16 - more vids
and user testimonial. If this doesnt put a smilie on your face you're dead inside. Check out the flip mag trick. Running perfectly. Thank you to all that have purchased. Send me some videos
QA vid:
Suppressed Dead Air Mask:
---------------------------------
User vids 😎
10/15
10/15
10/24
11/16 vids
User 5 goes brrrtttt too :)
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
www.youtube.com
User 4 goes brrrrttttt
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
www.youtube.com
User 6 goes brrrrtttt
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
youtube.com
Check out this slick flip mag trip. Not a single FTF/malfunction.
