Item Name: Item Gone: FS/FT B&J Machine P500 Pro Universal Front and Rear Sight Tool
Location: Toccoa
Zip Code: 30577
Item is for: Sale or Trade
Sale Price: $100 face to face, $106 shipped
Trade Value or Items Looking For: .32 S&W Long and / or .32 H&R Magnum ammo
Willing to Ship: Yes
Bill of Sale Required?: No
Item Description:
$100 face to face, $106 shipped. Or Best Reasonable offer.
I'm going to directly copy and paste (aka, pirate) the ad from n4rod from 2021, since he did a great job describing it:
"This is a high quality machined steel sight tool. It will remove and install front and rear dove tail sights on most pistols. It has a 2 position hold down clamp that will precisely hold a pistol's slide in the tool. Has an end plate that acts as a slide stop to hold the slide in position. Has hardened steel tips in the pusher tool. The pusher tool is aligned in and rides through the cross member to perfectly match up with the sight and will not scratch it. Has a flat tip for most sights, and an angled tip to fit Glock sights. ... This is a used sight tool, but in excellent condition."
And this is pirated from MidwayUSA's site:
"The B & J Machine P500Pro Universal sight tool is designed to remove, install and adjust front and rear dovetail sights on semi-automatic handguns. The most important improvement over the Standard Universal tool is the newly designed pusher tips. The Pro Universal pushers use hardened steel tips and a guide to prevent rotation, which can mar the sight. Two pushers are included: one with a squared end for standard sights, and one with an angled end to push against tapered sights, such as those found on Glock handguns. Another improvement over the original tool is a two position hold down clamp which speeds up setup and prevents the slide from lifting or twisting. The newly added end plate adds strength as well as keeping the slide from shifting.
"The P500 sight tool has been widely successful, and B&J Machine has listened to consumers who give this tool a workout on a regular basis. The result: a greatly improved, professional grade sight tool which can stand all the abuse handed out by a profressional gunsmith. The modified tool also includes features to lessen the time spent performing the task of removing and replacing sights.
"Notes:
On slides with side mounted safeties or decocking levers, a spacer may need to be used to ensure a flat surface for the tool to press against. On some models, these levers may need to be removed from the handgun. Be sure not to tighten the tool against the safety or decocking lever, as it could bend or break these delicate parts."
I am the second owner and have used this one time. It is complete as far as I know, and includes the bushings to hold the tool in a vise. Includes the original instructions.
I can travel about an hour from Toccoa, Ga and am mostly open starting Monday, Oct 13th - Sunday Oct 28th. If you're in NE Ga, Commerce to Clayton, Athens to Cornelia, we can meet part way.
Since gas is still close to $3/gallon I will ship for the ridiculously low price of $6 (2 gallons of gasoline +/-).
No trades, please, except ammo in .32 S&W Long and / or .32 H&R Magnum. I'm seriously trying to downsize.
I can take cash, PayPal or Venmo, or USPS money orders.
Pictures:
Location: Toccoa
Zip Code: 30577
Item is for: Sale or Trade
Sale Price: $100 face to face, $106 shipped
Trade Value or Items Looking For: .32 S&W Long and / or .32 H&R Magnum ammo
Willing to Ship: Yes
Bill of Sale Required?: No
Item Description:
B&J Machine P500 Pro Universal Front and Rear Sight Tool.
Great for installing and removing dovetail sights.$100 face to face, $106 shipped. Or Best Reasonable offer.
I'm going to directly copy and paste (aka, pirate) the ad from n4rod from 2021, since he did a great job describing it:
"This is a high quality machined steel sight tool. It will remove and install front and rear dove tail sights on most pistols. It has a 2 position hold down clamp that will precisely hold a pistol's slide in the tool. Has an end plate that acts as a slide stop to hold the slide in position. Has hardened steel tips in the pusher tool. The pusher tool is aligned in and rides through the cross member to perfectly match up with the sight and will not scratch it. Has a flat tip for most sights, and an angled tip to fit Glock sights. ... This is a used sight tool, but in excellent condition."
And this is pirated from MidwayUSA's site:
"The B & J Machine P500Pro Universal sight tool is designed to remove, install and adjust front and rear dovetail sights on semi-automatic handguns. The most important improvement over the Standard Universal tool is the newly designed pusher tips. The Pro Universal pushers use hardened steel tips and a guide to prevent rotation, which can mar the sight. Two pushers are included: one with a squared end for standard sights, and one with an angled end to push against tapered sights, such as those found on Glock handguns. Another improvement over the original tool is a two position hold down clamp which speeds up setup and prevents the slide from lifting or twisting. The newly added end plate adds strength as well as keeping the slide from shifting.
"The P500 sight tool has been widely successful, and B&J Machine has listened to consumers who give this tool a workout on a regular basis. The result: a greatly improved, professional grade sight tool which can stand all the abuse handed out by a profressional gunsmith. The modified tool also includes features to lessen the time spent performing the task of removing and replacing sights.
"Notes:
On slides with side mounted safeties or decocking levers, a spacer may need to be used to ensure a flat surface for the tool to press against. On some models, these levers may need to be removed from the handgun. Be sure not to tighten the tool against the safety or decocking lever, as it could bend or break these delicate parts."
I am the second owner and have used this one time. It is complete as far as I know, and includes the bushings to hold the tool in a vise. Includes the original instructions.
I can travel about an hour from Toccoa, Ga and am mostly open starting Monday, Oct 13th - Sunday Oct 28th. If you're in NE Ga, Commerce to Clayton, Athens to Cornelia, we can meet part way.
Since gas is still close to $3/gallon I will ship for the ridiculously low price of $6 (2 gallons of gasoline +/-).
No trades, please, except ammo in .32 S&W Long and / or .32 H&R Magnum. I'm seriously trying to downsize.
I can take cash, PayPal or Venmo, or USPS money orders.
Pictures:
DISCLAIMER: Always comply with local, state, federal, and international law. The Outdoors Trader does not become involved in transactions between parties. Review our
Privacy Policy
and
Terms of Use
for more information.
