Item has been relisted, you can find the new listing at: https://www.theoutdoorstrader.com/threads/fs-modernized-fighting-ak47-pistol.1874055/
Item Name: FS Modernized fighting Mpap92 AK47 pistol
Location: Flowery Branch
Zip Code: 30542
Item is for: Sale Only
Sale Price: $900
Caliber: 7.62x39
Willing to Ship: No
Bill of Sale Required?: Yes
Billing Information: No bill of sale. Just want to record name and date of birth from buyers GA driver's license. I have no problem writing one at the buyer's request.
Item Description: I am selling my upgraded AK47 pistol to build a very specific 6.5 grendel upper for an ar15. I am not interested in trades.
PRICES FIRM
$900 for AK with upgrades (no mags included)
$8 per magpul AK47 mag (used or new) inventory of 17
$0.25 per round (Wolf Polyformance 123gr non-corrosive hollow point all from the same lot) 555 rounds total
If you're interested I'll throw in my 50 cal ammo can for $10. (not willing to sell just the ammo can)
Everything for $1,100. I'm only willing to drive around 30 min from Flowery Branch to meet up.
ABOUT THE PISTOL
The base pistol is a Century Arms Mpap 92. I purchased it stock with a 10 inch barrel, hinged top cover, and (I believe, but am not certain) forged trunnions. The pistol does not have a scope rail, but a red dot optic is included.
The rivets are set properly, front sight and front sight base have no deformation, and with the rifle zeroed the front sight post remains centered. The front and rear trunnions have no deformation or cracking. The bolt carrier has a small amount of mushrooming on the rear, but it hasn't affected the rifle in any way. (picture included titled AK4) The bolt and area of the BCG where the bolt touch have no deformation. I have never experienced a failure in the rifle that was not ammo related. I have never ran corrosive ammo through the weapon and am the sole owner of it so far. The rifle has seen around a total of 1,200 rounds. It has been through one AK specific rifle class (where an Ak armorer said it was good to go), hiked multiple mountains with me, and felt the caress of many beautiful womens' trigger fingers.
Here's the list of upgrades, starting from the muzzle:
-Bulgarian 4 piece flash hider
-Midwest industries handguard (designed for Aimpoint T1)
-Primary Arms Advanced Microdot (with absolute cowitness)
-Krebs Custom hammer and trigger pin retention plate
-Tapco G2 twin hook trigger
-Krebs Custom Selector switch
-Hogue pistol grip
-Storm Werkz left side folder (AR15 buffer tube compatable)
-sling compatable Tapco endplate
-Shockwave Technologies pistol brace
-The pistol was painted FDE with Brownells Alumahyde 2 in November of 2016. The paint has held up well for the amount of activity this rifle has seen.
If you're wondering how I came to my final price for the AK I added up my total investment into the gun (labor not included) and am asking for 60% of my investment.
OTHER INFO:
-The current weight of the pistol unloaded is 7lbs and 15oz.
-I have always kept this weapon cleaned, lubricated, and in the best condition I could.
-All screws have had blue loctite applied to then, excluding the rear castle nut, which I have left that way so the rear could be replaced with whatever the buyer wants to replace it with. If you request it I will loctite the caste nut and torque it to 35 ft lbs per spec.
I am not interested in individually selling the parts, or the pistol with the parts removed.
Feel free to ask question THAT WERE NOT ALREADY ANSWERED. I will try to respond to you as quickly as possible. If you're genuinely interested I have more pictures including the front and rear trunnions, and the view of the optic's cowitness while looking down the sights.
If you're looking to get fully kitted out let me know and I have a chest rig and/or plate carrier that I would be willing to throw in at the right price that will work with whatever platform (AR, AK, M1A, FAL) you like to run.
Pictures:
Item Name: FS Modernized fighting Mpap92 AK47 pistol
Location: Flowery Branch
Zip Code: 30542
Item is for: Sale Only
Sale Price: $900
Caliber: 7.62x39
Willing to Ship: No
Bill of Sale Required?: Yes
Billing Information: No bill of sale. Just want to record name and date of birth from buyers GA driver's license. I have no problem writing one at the buyer's request.
Item Description: I am selling my upgraded AK47 pistol to build a very specific 6.5 grendel upper for an ar15. I am not interested in trades.
PRICES FIRM
$900 for AK with upgrades (no mags included)
$8 per magpul AK47 mag (used or new) inventory of 17
$0.25 per round (Wolf Polyformance 123gr non-corrosive hollow point all from the same lot) 555 rounds total
If you're interested I'll throw in my 50 cal ammo can for $10. (not willing to sell just the ammo can)
Everything for $1,100. I'm only willing to drive around 30 min from Flowery Branch to meet up.
ABOUT THE PISTOL
The base pistol is a Century Arms Mpap 92. I purchased it stock with a 10 inch barrel, hinged top cover, and (I believe, but am not certain) forged trunnions. The pistol does not have a scope rail, but a red dot optic is included.
The rivets are set properly, front sight and front sight base have no deformation, and with the rifle zeroed the front sight post remains centered. The front and rear trunnions have no deformation or cracking. The bolt carrier has a small amount of mushrooming on the rear, but it hasn't affected the rifle in any way. (picture included titled AK4) The bolt and area of the BCG where the bolt touch have no deformation. I have never experienced a failure in the rifle that was not ammo related. I have never ran corrosive ammo through the weapon and am the sole owner of it so far. The rifle has seen around a total of 1,200 rounds. It has been through one AK specific rifle class (where an Ak armorer said it was good to go), hiked multiple mountains with me, and felt the caress of many beautiful womens' trigger fingers.
Here's the list of upgrades, starting from the muzzle:
-Bulgarian 4 piece flash hider
-Midwest industries handguard (designed for Aimpoint T1)
-Primary Arms Advanced Microdot (with absolute cowitness)
-Krebs Custom hammer and trigger pin retention plate
-Tapco G2 twin hook trigger
-Krebs Custom Selector switch
-Hogue pistol grip
-Storm Werkz left side folder (AR15 buffer tube compatable)
-sling compatable Tapco endplate
-Shockwave Technologies pistol brace
-The pistol was painted FDE with Brownells Alumahyde 2 in November of 2016. The paint has held up well for the amount of activity this rifle has seen.
If you're wondering how I came to my final price for the AK I added up my total investment into the gun (labor not included) and am asking for 60% of my investment.
OTHER INFO:
-The current weight of the pistol unloaded is 7lbs and 15oz.
-I have always kept this weapon cleaned, lubricated, and in the best condition I could.
-All screws have had blue loctite applied to then, excluding the rear castle nut, which I have left that way so the rear could be replaced with whatever the buyer wants to replace it with. If you request it I will loctite the caste nut and torque it to 35 ft lbs per spec.
I am not interested in individually selling the parts, or the pistol with the parts removed.
Feel free to ask question THAT WERE NOT ALREADY ANSWERED. I will try to respond to you as quickly as possible. If you're genuinely interested I have more pictures including the front and rear trunnions, and the view of the optic's cowitness while looking down the sights.
If you're looking to get fully kitted out let me know and I have a chest rig and/or plate carrier that I would be willing to throw in at the right price that will work with whatever platform (AR, AK, M1A, FAL) you like to run.
Pictures:
