***To trade for this item you will need a minimum of 10 positive feedbacks or have been on the odt for 5 years or more with some level of positive feedback. If you have multiple negative feedbacks I won’t trade with you***
Tisas Double Stack BR9 9mm 2011 style pistol. This pistol has around 250 rounds thru it. Trigger pull is right around 2.25lbs. This is from my personal collection. Comes with a good selection of upgrades and mags. See the below list of upgrades. Not looking to separate any of these items. You will need to take the entire kit. I had to lightly file the front shelf of the optics cut. The factory cut was too tight to mount the Holosun. I cold blued the areas under the optic that were smoothed out. Evidently this was an issue some of the pistols had when they came from the factory. The optic now sits flat and is rock solid. There are mounting lugs/points on the optics cut. Meet up at the Publix off Wade Green Rd in Kennesaw or halfway for the right trade.
Upgrades and accessories:
-Red Dirt flat trigger installed(This trigger is a big upgrade over the OEM trigger)
-Wilson Combat Spring kit installed
-Wilson Combat extractor installed
-6 twenty round Springfield Prodigy oem mags
-Holosun 507k(slight blemish in the top of the optics finish). The glass is clear and without any issues.
-Upgraded Thunder Mountain grip screws
-Tisas OEM Magwell
-Crossbread Holster.
-Spare oem springs
-Optics plate cover
-Oem grip screws
Trades I’m looking for:
-Radian Ramjet for gen 5 g17(bronze barrel preferred)
-Surefire m600 or scout weapons light in black
-Aero M4E1 or better quality stripped lower reciever. I could also go for a cool looking good quality milled set.
-9mm ammo fmj cheap range ammo, 223/.556 cheap range ammo, 12 gauge 2 3/4in slugs, and 12 gauge mini shells. 9mm fmj range ammo.
-Champion 3500-4500 watt duel or tri fuel inverter generator with wheels(newish generator).
-Floor mounted drill press. Good quality press. I don’t need a commercial quality set up. Just a top notch home rig.
-Big fat $100 bills
Tisas Double Stack BR9 9mm 2011 style pistol. This pistol has around 250 rounds thru it. Trigger pull is right around 2.25lbs. This is from my personal collection. Comes with a good selection of upgrades and mags. See the below list of upgrades. Not looking to separate any of these items. You will need to take the entire kit. I had to lightly file the front shelf of the optics cut. The factory cut was too tight to mount the Holosun. I cold blued the areas under the optic that were smoothed out. Evidently this was an issue some of the pistols had when they came from the factory. The optic now sits flat and is rock solid. There are mounting lugs/points on the optics cut. Meet up at the Publix off Wade Green Rd in Kennesaw or halfway for the right trade.
Upgrades and accessories:
-Red Dirt flat trigger installed(This trigger is a big upgrade over the OEM trigger)
-Wilson Combat Spring kit installed
-Wilson Combat extractor installed
-6 twenty round Springfield Prodigy oem mags
-Holosun 507k(slight blemish in the top of the optics finish). The glass is clear and without any issues.
-Upgraded Thunder Mountain grip screws
-Tisas OEM Magwell
-Crossbread Holster.
-Spare oem springs
-Optics plate cover
-Oem grip screws
Trades I’m looking for:
-Radian Ramjet for gen 5 g17(bronze barrel preferred)
-Surefire m600 or scout weapons light in black
-Aero M4E1 or better quality stripped lower reciever. I could also go for a cool looking good quality milled set.
-9mm ammo fmj cheap range ammo, 223/.556 cheap range ammo, 12 gauge 2 3/4in slugs, and 12 gauge mini shells. 9mm fmj range ammo.
-Champion 3500-4500 watt duel or tri fuel inverter generator with wheels(newish generator).
-Floor mounted drill press. Good quality press. I don’t need a commercial quality set up. Just a top notch home rig.
-Big fat $100 bills
