PLEASE READ FULL AD.
This is a Pike arms gatling gun kit that holds two Ruger 10/22 rifles. Minus the stocks obviously. Comes as pictured. Full pike arms kit, 2 rifles minus the stocks, and 2 25 round ruger mags.
It currently does not run correctly. It will fire a round from both firearms but will not reset the trigger.
I will try my best to explain how it operates and what it is doing (see pictures). As you pull the trigger for the gatling gun the bar that is circled in green which has two posts that are circled in red pulls the triggers to the actual 10/22 rifles. As you spin the crank on the gatling gun the piece circled in blue pushes the bar back forward by hitting the piece circled in yellow to reset the trigger. The issue is that it isn't pushing it forward far enough. It may be an easy fix by adjusting the rifles in the kit but I haven't been able to get it to run correctly or find a permanent fix. You can go around the piece circled in blue with electrical tape a few times and it will run until the tape wears off so it is not off by much.
Maybe some one who likes tinkering with stuff can get it running and have a cool little range toy but for me it's just sat in the gun room as decoration for a couple years. Just looking to trade for something I can actuality shoot. It's hard to put a value on something that isn't working properly so just offer away. The kit retails for $999 and a 10/22 rifle goes for about $250 each last I looked. So that's what it would go for in new properly working condition. If you have any questions or want specific pictures I will do my best in answering them or getting you pictures.
This is a Pike arms gatling gun kit that holds two Ruger 10/22 rifles. Minus the stocks obviously. Comes as pictured. Full pike arms kit, 2 rifles minus the stocks, and 2 25 round ruger mags.
It currently does not run correctly. It will fire a round from both firearms but will not reset the trigger.
I will try my best to explain how it operates and what it is doing (see pictures). As you pull the trigger for the gatling gun the bar that is circled in green which has two posts that are circled in red pulls the triggers to the actual 10/22 rifles. As you spin the crank on the gatling gun the piece circled in blue pushes the bar back forward by hitting the piece circled in yellow to reset the trigger. The issue is that it isn't pushing it forward far enough. It may be an easy fix by adjusting the rifles in the kit but I haven't been able to get it to run correctly or find a permanent fix. You can go around the piece circled in blue with electrical tape a few times and it will run until the tape wears off so it is not off by much.
Maybe some one who likes tinkering with stuff can get it running and have a cool little range toy but for me it's just sat in the gun room as decoration for a couple years. Just looking to trade for something I can actuality shoot. It's hard to put a value on something that isn't working properly so just offer away. The kit retails for $999 and a 10/22 rifle goes for about $250 each last I looked. So that's what it would go for in new properly working condition. If you have any questions or want specific pictures I will do my best in answering them or getting you pictures.
