• All users have been asked to change their passwords. This is just a precaution. Thanks!
  • If you are having trouble with your password change please click here for help.

Made my own bow string. What do you guys think?

streetroc

Default rank 5000+ posts Lifetime Supporter
DO NOT TOUCH THE TRIM!
54   0
Joined
Aug 14, 2010
Messages
12,682
Reaction score
34,442
Location
Acworth
Earlier this year my flight instructor gave me this old Martin Cougar Speed Flite compound bow that had been laying in the back of the hangar for years. I've been having tons of fun shooting cheap aluminum arrows at a cardboard box full of newspapers in my backyard. Of course the original string that was probably 30 years old eventually snapped. (I've been wearing safety glasses when I shoot it because I knew that would happen sooner or later). I took it to several archery shops but nobody wanted to touch it because of how old it is. So I went down to Walmart and got some 50 lb test braided fishing line. I took 25 strands of it, pulled it tight to take all the stretch out of it, and then twisted it together. So in theory it's capable of handling 1,250lbs which should be more than enough for a 50 lb bow. I used a ratchet strap to compress the limbs, measured it to exactly 35 inches like the original string, then tied it off on each of the cables with some electrical tape under it to prevent chafing. I wrapped a piece of black duct tape around the middle to give a thick piece to nock my arrows and grab it with my release. I've put about a hundred arrows down range with it so far and it seems to work great. It's actually a lot quieter than the original string as well. What do you guys think? Will this hold up? And yes I'm still wearing safety glasses when I shoot it just in case!

20250927_153700.jpg


20250928_092158.jpg


20250927_153633.jpg


20250927_153651.jpg


20250928_092122.jpg
 
No idea. If it doesn't work you can get someone to make a string to your spec. Just Google custom bow string. It's a common thing.

You probably want to put on a cable slide to protect the cables.

If you want to tighten groups, you will have to match and tune your arrows. But why bother as long as it's fun right?
 
No idea. If it doesn't work you can get someone to make a string to your spec. Just Google custom bow string. It's a common thing.

You probably want to put on a cable slide to protect the cables.

If you want to tighten groups, you will have to match and tune your arrows. But why bother as long as it's fun right?

What's a cable slide?

Lol I don't think there's any way to match or tune these arrows. When I miss they hit trees or skip off the ground and go off into the woods and get bent all to hell. I do my best to straighten them out again but most of them are still warped and wavy. Sometimes I can even see them wobbling around while they fly. But as you said, I'm having fun so who cares?

Also that group was shot from about 50 yards. I've even taken it out to 70 or 80 yards. There aren't any sights on the bow either so I just shoot it by feel and muscle memory.
 
I have a cheap old compound bow too, just for backyard plinking.

It came with a set of brass pins for a front sighting system but the rubber peep sight that had been attached to the string was long gone, so I didn't use the sights for the first few range sessions.
I missed a lot.

Then I had an archery shop install a rear sight (just a little rubber ring / grommet)
and put a D-Loop on my existing string so then I could use a mechanical trigger release and any wear & tear caused by the clamping jaws of the mechanical trigger would not be on the main string itself-- just this little extra D loop which is easily replaceable.

conclusion : the sight plus the mechanical trigger release made my accuracy much better, and hitting the target is more fun than missing it!!

I lose fewer arrows now!

(But, the consequence of being accurate and consistent is sometimes you might slam arrow #2 directly into the back of arrow number #1.)
 
I have a cheap old compound bow too, just for backyard plinking.

It came with a set of brass pins for a front sighting system but the rubber peep sight that had been attached to the string was long gone, so I didn't use the sights for the first few range sessions.
I missed a lot.

Then I had an archery shop install a rear sight (just a little rubber ring / grommet)
and put a D-Loop on my existing string so then I could use a mechanical trigger release and any wear & tear caused by the clamping jaws of the mechanical trigger would not be on the main string itself-- just this little extra D loop which is easily replaceable.

conclusion : the sight plus the mechanical trigger release made my accuracy much better, and hitting the target is more fun than missing it!!

I lose fewer arrows now!

(But, the consequence of being accurate and consistent is sometimes you might slam arrow #2 directly into the back of arrow number #1.)

I have a mechanical trigger release but no sights. Sights feel like cheating. Genghis Khan didn't conquer the world with sights on his bow lol
 
Having worked with bows for about 45 years, I’m both impressed with your ingenuity and surprised that you didn’t destroy your face in the process.

I love it

I'm still wearing the safety glasses just in case.

I've got about 300 arrows on it now and no signs of fraying or stretching. I do need to find a better way to protect the string where I nock my arrows and grab it with the release. The duct tape is wearing through in about 30 or 40 shots. Any ideas? Maybe a thin piece of plastic from a coke bottle?
 
Earlier this year my flight instructor gave me this old Martin Cougar Speed Flite compound bow that had been laying in the back of the hangar for years. I've been having tons of fun shooting cheap aluminum arrows at a cardboard box full of newspapers in my backyard. Of course the original string that was probably 30 years old eventually snapped. (I've been wearing safety glasses when I shoot it because I knew that would happen sooner or later). I took it to several archery shops but nobody wanted to touch it because of how old it is. So I went down to Walmart and got some 50 lb test braided fishing line. I took 25 strands of it, pulled it tight to take all the stretch out of it, and then twisted it together. So in theory it's capable of handling 1,250lbs which should be more than enough for a 50 lb bow. I used a ratchet strap to compress the limbs, measured it to exactly 35 inches like the original string, then tied it off on each of the cables with some electrical tape under it to prevent chafing. I wrapped a piece of black duct tape around the middle to give a thick piece to nock my arrows and grab it with my release. I've put about a hundred arrows down range with it so far and it seems to work great. It's actually a lot quieter than the original string as well. What do you guys think? Will this hold up? And yes I'm still wearing safety glasses when I shoot it just in case!

View attachment 9511906

View attachment 9511907

View attachment 9511911

View attachment 9511912

View attachment 9511913
Brother?!?!?! I use to tune and make bow strings for a living from 16 to 18 YO. Bow strings are easy to make. Use real string brother.
https://www.3riversarchery.com/3rivers-archery-string-building-kit.html
 
Back
Top Bottom