Redding 40 S&W G-Rx Die/Lee Precision Bulge Buster

[CBR600]

Anybody have one laying around ? I have some in a cart on Ebay, just wanted to check here first.

 

[PA4476]

I've used the Lee die that does this, the die is also a factory crimp die, you just remove the crimp part and send the rounds through the die. The lee comes with a container that mounts to the top of the die to catch the rounds as they pass through. I used a coolant line from a lathe to make mine send the rounds to a catch bin. Here's a short video I made using mine.

 

[CBR600]

I've used the Lee die that does this, the die is also a factory crimp die, you just remove the crimp part and send the rounds through the die. The lee comes with a container that mounts to the top of the die to catch the rounds as they pass through. I used a coolant line from a lathe to make mine send the rounds to a catch bin. Here's a short video I made using mine.

Thanks. I meant to add that to the post, trying to decide between the two. My Lee carbide die set should be arriving today too. Preciate the info