Item has been relisted, you can find the new listing at: http://www.theoutdoorstrader.com/threads/fs-ft-2006-yamaha-yzf-r1.885323/
Item Name: FS/FT 2006 Yamaha YZF R1
Location: Dallas, GA
Zip Code: 30157
Item is for: Sale or Trade
Sale Price: 6500.00 obo
Trade Value or Items Looking For: An SV650 or similar and 3500 cash / A Triumph good running driving unrestored TR6 / A good restorable TR6 plus 2500 cash.
Willing to Ship: No
Bill of Sale Required?: No
Item Description:
20598 miles. Clean title.
2006 Yamaha YZF R1 modded. Well cared for. Has been tracked and has been down in the past, but never abused, have had GMD Computrack Atl measure it since and it is perfectly straight.
Only thinking of selling this because I need a smaller "slower" bike for the track and I found a classic British sports car to restore (72 TR6).
- Asking 6500.00 obo
- ...or a decent first gen SV650 plus 3500.00. Other bike trades considered but I have to have 3500, it's got to be something trackable, and must be in good working order, NO JUNK
- Will also trade for a running driving TR6 or a good restorable TR6 plus 2500.00
Mods include:
Dynotuned by Huey, at Marietta motorsports, 162hp 76ftlbs to the wheel (about 180 engine hp)
Bike geometry set by GMD Computrack ATL. Sprung and valved for 180lb rider.
- Graves velocity stacks.
- Graves SS full system with Ti mufflers.
- DynoJet PCIII USB.
- DynoJet Quickshifter.
- SpeedoHealer calibrated by GPS.
- Woodcraft case covers.
- Ohlins steering damper.
- Graves damper mount.
- Ohlins 20mm FPK kit in OEM gold forks - installed by GMD Computrack Atl.
- Inner fork tubes cross hatched and polished to reduce stiction by GMD.
- Race tech linear rate fork springs installed by GMD.
- Penske 8983 "double ckicker" rear shock built and installed by GMD.
- EBC HH sintered pads.
- 2 line braided brake line, front
- Braided rear brake line.
- Rear reservoir delete.
- Goodridge speed bleeders.
- Renthal aluminum 520 rear sprocket (44T).
- Renthal steel 520 front sprocket (16T).
- EK MVXZ 520 chain (gold).
- Motion Pro throttle revolver w/ interchangeable throttle wheels.
- CRG RC2 shorty levers.
- Vortex clip-ons.
- Renthal dual compound grips.
- Vortex rearsets (GP-shift) w/quick shifter (right peg has lowside scratches at the end, shown in pics).
- Sharkskinz street bodywork.
- MotoD Smoke Integrated taillight - sequential turn signals.
- No side markers, yellow LED corner lights are setup as turn signal only.
- Paint matched mirror block offs for track (no name brand).
- Graves clutch slider.
- Graves frame sliders (right puck scratched shown in pics).
- Woodcraft swingarm spool sliders.
- Zero Gravity double bubble wind screen.
- Paint matched GYTR solo seat cowl.
- Stomp grip.
- Rascal Grafiks tank pad.
Item Name: FS/FT 2006 Yamaha YZF R1
Location: Dallas, GA
Zip Code: 30157
Item is for: Sale or Trade
Sale Price: 6500.00 obo
Trade Value or Items Looking For: An SV650 or similar and 3500 cash / A Triumph good running driving unrestored TR6 / A good restorable TR6 plus 2500 cash.
Willing to Ship: No
Bill of Sale Required?: No
Item Description:
20598 miles. Clean title.
2006 Yamaha YZF R1 modded. Well cared for. Has been tracked and has been down in the past, but never abused, have had GMD Computrack Atl measure it since and it is perfectly straight.
Only thinking of selling this because I need a smaller "slower" bike for the track and I found a classic British sports car to restore (72 TR6).
- Asking 6500.00 obo
- ...or a decent first gen SV650 plus 3500.00. Other bike trades considered but I have to have 3500, it's got to be something trackable, and must be in good working order, NO JUNK
- Will also trade for a running driving TR6 or a good restorable TR6 plus 2500.00
Mods include:
Dynotuned by Huey, at Marietta motorsports, 162hp 76ftlbs to the wheel (about 180 engine hp)
Bike geometry set by GMD Computrack ATL. Sprung and valved for 180lb rider.
- Graves velocity stacks.
- Graves SS full system with Ti mufflers.
- DynoJet PCIII USB.
- DynoJet Quickshifter.
- SpeedoHealer calibrated by GPS.
- Woodcraft case covers.
- Ohlins steering damper.
- Graves damper mount.
- Ohlins 20mm FPK kit in OEM gold forks - installed by GMD Computrack Atl.
- Inner fork tubes cross hatched and polished to reduce stiction by GMD.
- Race tech linear rate fork springs installed by GMD.
- Penske 8983 "double ckicker" rear shock built and installed by GMD.
- EBC HH sintered pads.
- 2 line braided brake line, front
- Braided rear brake line.
- Rear reservoir delete.
- Goodridge speed bleeders.
- Renthal aluminum 520 rear sprocket (44T).
- Renthal steel 520 front sprocket (16T).
- EK MVXZ 520 chain (gold).
- Motion Pro throttle revolver w/ interchangeable throttle wheels.
- CRG RC2 shorty levers.
- Vortex clip-ons.
- Renthal dual compound grips.
- Vortex rearsets (GP-shift) w/quick shifter (right peg has lowside scratches at the end, shown in pics).
- Sharkskinz street bodywork.
- MotoD Smoke Integrated taillight - sequential turn signals.
- No side markers, yellow LED corner lights are setup as turn signal only.
- Paint matched mirror block offs for track (no name brand).
- Graves clutch slider.
- Graves frame sliders (right puck scratched shown in pics).
- Woodcraft swingarm spool sliders.
- Zero Gravity double bubble wind screen.
- Paint matched GYTR solo seat cowl.
- Stomp grip.
- Rascal Grafiks tank pad.
Last edited:
