• ODT Gun Show this Saturday! - Click here for info and tickets!

Search results for query: *

  1. Remington 870 forward pin issue

    I have, I'm going to look over it again

  2. Remington 870 forward pin issue

    Have a Remington 870. So, when both pins are in holding trigger group, the pump won't cycle. If I remove the smaller forward pinand leave the rear pin in, then it will cycle and fire. I have no idea why the pump won't cycle with the forward pin in. Any ideas?

  3. Remington 1100 stock removal tool

    I got it. I took my big ass screwdriver and grinded the tip off to make it bigger. Put the stock in the vice and used the wrench on the screwdriver and got it off. Thanks for all you guys advice

  4. Remington 1100 stock removal tool

    I put Kroil on it, I have one of these screwdrivers. I put the stock in my bench vise so I could get leverage on it. Still wouldn't move

  5. Remington 1100 stock removal tool

    I did. Wouldnt move

  6. Remington 1100 stock removal tool

    I have a big ass screwdriver. It won't budge it.

  7. Remington 1100 stock removal tool

    was wondering if anyone had one I could borrow. I'd pay shipping. I cant get mine to budge at all. Thanks

  8. Remington 870 shell latch staking tool

    Nice. I bought one

  9. Remington 870 shell latch staking tool

    Does anyone have one I can borrow?

  10. Kitchen sink Gun repair screw ups and learning experiances

    Never take apart a lever action.

  11. Sling for scorpion evo3 with kak blade

    Any one have any advice for a pistol sling for a scorpion?

  12. AR trouble

    listen to the Beav, he's slammed some things in a lower before.

  13. Browning BAR 30-06 problems

    looked at Numrich, brownells, Midwest gun works, and browning. No one has one.

  14. Browning BAR 30-06 problems

    I've looked all over for a new gas regulator. Brownings website says they are "obsolete". that's no Bueno.

  15. Browning BAR 30-06 problems

    I did this when I got mine, and mine wasn't dirty at all. pretty clean actually. i'm going to fire some 180gr ammo this weekend and see if that is the reason. I re-cleaned the gas regulator, so we'll see.

  16. Browning BAR 30-06 problems

    I cleaned it thoroughly when I got it. i'm gonna change ammo, and try it out. thanks

  17. Browning BAR 30-06 problems

    I have a BAR in 30-06 made in 1986 in Belgium. it fires, then the BCG comes back, ejects the spent casing, but doesn't come back far enough to pick up the new round and load into the chamber. wondering if I need a new gas regulator? I put in on tight. I shoot 150gr, maybe move up to 180gr ammo...

  18. Gunsmithing on a older model Browning A5

    yep, pull the magazine tube and check the spring. I bet it's jammed up in there and not recoiling properly.

  19. Need a gunsmith/recommendations

    Andy Gazaway Gazaway Machine and Tool. Great smith. up Hwy9 before Hamby Rd.

  20. Remington 742 Barrel Wrench

    Any one have one I can borrow or rent? $45 seems a lot to only use once or twice. thanks.
Back
Top Bottom