My latest pain in the ass project. It truly is a labor of love though. Cause if I didn't love it, I damn sure wouldn't do it.
2002 Baikal IZH-27-EM-1C in 20ga
To Do List:
1. Find a new stock, which is proving damn near impossible, plus nobody makes aftermarket stocks for this model. (Takeoffs from a Remington SPR310, MP27, or Charles Daly 202 will also fit, so if you know where I can find one, please let me know ASAP) or I am gonna have to make one, which I could easily do, if I had the proper tools.
2. Take apart the entire trigger group and polish every contact surface, then put it back together.
3. Disable the automatic saftey engagement
4. Color case harden the trigger, the screws, the safety, break lever, ejectors, forearm latch, and the vent rib.
5. Sand down the forearm and reprofile to a more friendly shape for trap shooting
6. Remove the stuck choke in the top barrel
7. Install a set of extended ported chokes. Imp Cyl on bottom and a Mod on top.
As you see from my list I still have quite a bit of work ahead of me. Oh well atleast I already made it shiny. That was the really time consuming part.
2002 Baikal IZH-27-EM-1C in 20ga
To Do List:
1. Find a new stock, which is proving damn near impossible, plus nobody makes aftermarket stocks for this model. (Takeoffs from a Remington SPR310, MP27, or Charles Daly 202 will also fit, so if you know where I can find one, please let me know ASAP) or I am gonna have to make one, which I could easily do, if I had the proper tools.
2. Take apart the entire trigger group and polish every contact surface, then put it back together.
3. Disable the automatic saftey engagement
4. Color case harden the trigger, the screws, the safety, break lever, ejectors, forearm latch, and the vent rib.
5. Sand down the forearm and reprofile to a more friendly shape for trap shooting
6. Remove the stuck choke in the top barrel
7. Install a set of extended ported chokes. Imp Cyl on bottom and a Mod on top.
As you see from my list I still have quite a bit of work ahead of me. Oh well atleast I already made it shiny. That was the really time consuming part.
