Ok, here you go.
i went down the same road as you. I bought a civilian version and paid attention to its conversion while staying 922R Compliant.
first thing I did was purchase the A&S enhanced trigger guard. It’s a very well made part with no fitting required. The channel leading to the shell carrier really helps loading and this is a 922R (US made) part.
next, I ordered all the Benelli parts to build a complete trigger pack from Midwest Gun Works (MGW), minus the Hammer, Trigger, Disconnector, carrier and Springs. These parts were ordered from Freedom Fighter Tactical (FFT), and are US made for 922R Compliance. All of these parts with exception of the safety were drop in parts with no fitting required. The safety required minor fitting to work smoothly.
Next, I ordered the 7 round Benelli tube (got a deal because of the scratch) and the spring from MGW. Ordered a light mount from Impact Weapons Components (IWC). Lastly, the scalarworks RMR mount and RMR.
I have no regrets on any of the parts chosen but I do have plans to purchase a better solution for the bolt release. I’ll probably go with the FFT part on that as well.
Hope this helps, good luck
Tim
i went down the same road as you. I bought a civilian version and paid attention to its conversion while staying 922R Compliant.
first thing I did was purchase the A&S enhanced trigger guard. It’s a very well made part with no fitting required. The channel leading to the shell carrier really helps loading and this is a 922R (US made) part.
next, I ordered all the Benelli parts to build a complete trigger pack from Midwest Gun Works (MGW), minus the Hammer, Trigger, Disconnector, carrier and Springs. These parts were ordered from Freedom Fighter Tactical (FFT), and are US made for 922R Compliance. All of these parts with exception of the safety were drop in parts with no fitting required. The safety required minor fitting to work smoothly.
Next, I ordered the 7 round Benelli tube (got a deal because of the scratch) and the spring from MGW. Ordered a light mount from Impact Weapons Components (IWC). Lastly, the scalarworks RMR mount and RMR.
I have no regrets on any of the parts chosen but I do have plans to purchase a better solution for the bolt release. I’ll probably go with the FFT part on that as well.
Hope this helps, good luck
Tim
