Beretta 22lr conversion kit $180

[Wheeler]

Thanks for doing the legwork on this. I’d seen that magazine video too, & wondered if it would be the same with these mags. That’s awesome that you got it to work. Thanks for the tips!

Ive still got some feelers out on other forums. It would probably make too much sense for me to go to the Beretta forum and ask...

 

[shootsacanon]

Just removed the spacer on my 10 rd. Baseplate was glued tightly, but gave it a 2-3 minute soak in hot water (brought it to a boil in the microwave) and popped it right off. Soaked the baseplate separately a few times to get all the glue off. We’ll see how it runs, but the spring tension unloaded isn’t enough to keep the baseplate retaining tab fully in the baseplate, so I can slip it off easily without pressing the tab. I’ll either look for a heavier spring, or maybe cut down the spacer to get some of the pressure back, and gain a few rounds. Thanks rotaG69 for diving in first.

 

[rotaG69]

I stretched my spring a bit to give it a bit more push, but I think a longer spring such as that in the 15 round mag would be better. I did see this -
https://www.taylor-tactical-supply....t-Magazine-Spring-p/beretta-22-mag-spring.htm
But am not sure as to the specs or what capacity mag it is for.
(edit) I did send them a question, I'll post when I get a reply.

 

[rotaG69]

I just spoke with Taylor Tactical and gave them the specs for the 15 round spring, they are going to make the springs!
I'll let you know when I know availability, he seems really keen on making it fast!
edit - The one I previously shared a link for was for a 10 round...