-
If you are having trouble changng your password please click here for help.
Calling ODT users...
- Thread starter DaveTheMinion
- Start date
There was some serious white trash **** going on in the process... The AK handguard needed to be cut down to match the lines of the stock, then I had to drive in a nail to make a pilot hole for the grip, then fight to thread the screw in. Then I had to cut certain parts of the stock down, and then shorten it down to be able to mount the telestock when it comes in. I was outside with a glove on one hand, crocs on my feet, glock 27 on my side, cigarette in my mouth and no shirt. This thing is going full damn retard. the barrel is more then long enough to cut down and mount a flash suppressor. just need to trim down a quarter inch.
Don't worry, ill sand down the rough edges and hit her with a coat of flat black
she wont look so bad when she's done.
Looks like I'm gonna have to replan my stock mount, no good way to do this. Ill have to drill in with an 1 1/8 hole saw, weld the castle nut to the end plate and then drill a small hole in the end plate to run a screw. hopefully there's enough meat on the end plate and castle nut to do it. then I have to figure some way to stop the stock from twisting around.. this will be a *****.
Why not just get an old Tapco stock then whittle,sand,grind, down the wood stock on that thing to fit into the Tapco? I mean its not like it needs to function right? What model is that thing? Can't tell from the pictures.
Winchester 121. tapco stock from what?
That is freaking awesome... You know a youtube video of the white trash engineering would go tactically viral.
Like an SK Tapco stock,
"Custom" defined 
