Item has been relisted, you can find the new listing at: https://www.theoutdoorstrader.com/threads/fs-tac2-discreet-carry-ar15-m16-kit.1457519/
Item Name: FS TAC2 - DISCREET CARRY AR15/M16 KIT
Location: cumming
Zip Code: 30041
Item is for: Sale Only
Sale Price: 269.00+
Willing to Ship: Yes
Bill of Sale Required?: No
Item Description: Location: Alpharetta / Cumming
Zip Code: 30041
TAC2 - DISCREET CARRY AR15/M16 KIT *This Covert Carry Kit is for Direct Impingement systems only.
AR15CCK COVERT CARRY AR15 KIT with Briefcase - This is a "no tools required", barrel changing system, designed to work on your current AR15 rifle/carbine.
The system is designed to use a low-profile gas block, and allows your AR15 to be broken down into three major components, for quick barrel changes, as well as covert concealment (DISCREET CARRY), or storage. A 16-inch barreled AR15, with a collapsible stock, red dot sight, and two 30 rd. mags. can be carried in a standard briefcase. Full assembly and loading to firing condition can be accomplished in less than 30 seconds, with ease. This conversion replaces the existing barrel nut and fore end. Kit includes: QC (Quick Change) Barrel nut and lock plate, a 12-inch free float fore-end, fore-end lock ring, all made from 6061 T6 Aircraft aluminum, and black anodized. Multiple barrel systems require an additional Lock Plate for each barrel, which must be purchased separately. All this is accomplished for a third of the cost of similar systems. Normal change out of an AR15 barrel requires several specialized tools, a vise, and about 30-45 minutes to accomplish. This system requires a one-time replacement of the original barrel nut with the QC barrel nut, and then barrel change out is done with hands only in less than 30 seconds.
Gunsmith installation is recommended for initial conversion, however, most anyone with basic mechanical skills, and the proper tools can accomplish the task in less than an hour.
These will only fit Mil-spec Receivers.
They will not fit on the Bushmaster Carbon 15 Rifles.
Once conversion is completed, deployment is simple: 1. Open the briefcase, and remove the barrel and receiver unit. 2. Open the bolt, and insert the barrel into the upper receiver. While holding the barrel into the upper receiver, release the bolt. 3. Remove the fore-end tube from the briefcase and slide it over the barrel and screw tightly onto the barrel nut. 4. Extend the stock, chamber a cartridge, and your AR is ready for action. Lifetime Guarantee on the modification kit - not the briefcase ** Includes AR15CCK quick change barrel kit and covert briefcase pictured....FIREARM IS NOT INCLUDED !!
NO PAYPAL or CC, Sorry!!!
USPS $$$ Order Only
David@ 21st Century Weapons
FFL/SOT Since 1998
Pictures:
Item Name: FS TAC2 - DISCREET CARRY AR15/M16 KIT
Location: cumming
Zip Code: 30041
Item is for: Sale Only
Sale Price: 269.00+
Willing to Ship: Yes
Bill of Sale Required?: No
Item Description: Location: Alpharetta / Cumming
Zip Code: 30041
TAC2 - DISCREET CARRY AR15/M16 KIT *This Covert Carry Kit is for Direct Impingement systems only.
AR15CCK COVERT CARRY AR15 KIT with Briefcase - This is a "no tools required", barrel changing system, designed to work on your current AR15 rifle/carbine.
The system is designed to use a low-profile gas block, and allows your AR15 to be broken down into three major components, for quick barrel changes, as well as covert concealment (DISCREET CARRY), or storage. A 16-inch barreled AR15, with a collapsible stock, red dot sight, and two 30 rd. mags. can be carried in a standard briefcase. Full assembly and loading to firing condition can be accomplished in less than 30 seconds, with ease. This conversion replaces the existing barrel nut and fore end. Kit includes: QC (Quick Change) Barrel nut and lock plate, a 12-inch free float fore-end, fore-end lock ring, all made from 6061 T6 Aircraft aluminum, and black anodized. Multiple barrel systems require an additional Lock Plate for each barrel, which must be purchased separately. All this is accomplished for a third of the cost of similar systems. Normal change out of an AR15 barrel requires several specialized tools, a vise, and about 30-45 minutes to accomplish. This system requires a one-time replacement of the original barrel nut with the QC barrel nut, and then barrel change out is done with hands only in less than 30 seconds.
Gunsmith installation is recommended for initial conversion, however, most anyone with basic mechanical skills, and the proper tools can accomplish the task in less than an hour.
These will only fit Mil-spec Receivers.
They will not fit on the Bushmaster Carbon 15 Rifles.
Once conversion is completed, deployment is simple: 1. Open the briefcase, and remove the barrel and receiver unit. 2. Open the bolt, and insert the barrel into the upper receiver. While holding the barrel into the upper receiver, release the bolt. 3. Remove the fore-end tube from the briefcase and slide it over the barrel and screw tightly onto the barrel nut. 4. Extend the stock, chamber a cartridge, and your AR is ready for action. Lifetime Guarantee on the modification kit - not the briefcase ** Includes AR15CCK quick change barrel kit and covert briefcase pictured....FIREARM IS NOT INCLUDED !!
NO PAYPAL or CC, Sorry!!!
USPS $$$ Order Only
David@ 21st Century Weapons
FFL/SOT Since 1998
Pictures:
