Have any of y'all installed a 37mm Cobray Launcher onto a M16?

[AC-130 Above]

I have one, and want to mount it up to mimic the old school M203 look. However, I have noticed that it seems that once mounted it sits significantly lower than say a LMT. Have any of yall installed one of these before? Any tricks or tips on how or what you may need to make it look more properly done?

This is what I am going for:

This is what I believe it would look like: (I do not yet have a M16 style AR to mount it too) These images were pulled from Google

 

[Electra_glide_ryder]

Mine looks exactly like the bottom pic.

 

[Blue bio balls]

Does a mag fit?

 

[Gimmebackmybullets]

"Say hello to my little friend" I always wanted a 870 or Ithaca 37 12 ga mounted under my old green label A2. Never got around to that project tho.

 

[Electra_glide_ryder]

Yep

 

[AC-130 Above]

YepView attachment 2854636

Can you see anyway to raise the launcher so its not so far down from the heat shield? Wondering if the mounting hardware could be altered

 

[AC-130 Above]

Does a mag fit?

good question, not sure as I haven't built one yet it looks pretty close but as the member posted above looks like it fits but may be pretty tight

 

[Electra_glide_ryder]

Not really. Unless you can mill the spacer to be thinner. I would hate to alter an old school relic like these. I’m not sure how the loading lever is assembled in there either. You would need to examine that pretty close. Not much info available for these anywhere either.

 

[Electra_glide_ryder]

A GI 30 round mag has about 1/8” clearance to the trigger guard of the launcher.