Item Name: Item Gone: FS 10/22 builders kit for the tinkerers -Kidd barrel - Metal trigger...
Location: Roswell
Zip Code: 30075
Item is for: Sale Only
Sale Price: 425
Caliber: 22LR
Willing to Ship: Yes
Bill of Sale Required?: No
Item Description: Updated 31Jan
Dug in a little deeper and adding in the following:
(1) factory scope base
(1) set of what I think are millet angle loc rings (1”)
(1) rubber-metal pin buffer
Rainy day clean out. Would prefer to sell the whole package together. This will come with everything you need to build a 10/22 with the exception of a donor receiver.
I ran the original gun with the parts shown and it ran flawlessly. Here’s the list
(1) factory walnut stock with metal hardware (In pretty good condition)
(1) factory barrel (shows with a lot of blueing wear, surface rust that was cleaned up with steel wool)
(1) metal trigger assembly with Rimfire Tech bolt release (original release included) trigger pins and metal bolt stop trigger shows blueing wear
(1) factory bolt and charging handle
(1) vblock
The above gets you a “factory” 10/22
(1) modified 10/22 stock with the barrel band tip removed, finger grooves installed in foreend, and barrel channel opened up to accept a .920 barrel. I planned to paint this out but I liked the 2 tone and moved on to other projects.
(1) 16.5” Kidd Lightweight Fluted barrel (non-threaded)
(1) tech sight base rear and unknown front globe sight
(1) 10rd ruger magazine
(1) 25rd ruger magazine
As noted, I’d like to sell as a packages deal. This could be a fun build project and gives a lot of options to try out.
Looking to get $425 for everything not really interested in trades but would consider cz rimfires plus/minus cash.
if you see something you really want feel free to offer me your best price. I’ll respond to all reasonable offers with a yes or no.
Pictures:
Location: Roswell
Zip Code: 30075
Item is for: Sale Only
Sale Price: 425
Caliber: 22LR
Willing to Ship: Yes
Bill of Sale Required?: No
Item Description: Updated 31Jan
Dug in a little deeper and adding in the following:
(1) factory scope base
(1) set of what I think are millet angle loc rings (1”)
(1) rubber-metal pin buffer
Rainy day clean out. Would prefer to sell the whole package together. This will come with everything you need to build a 10/22 with the exception of a donor receiver.
I ran the original gun with the parts shown and it ran flawlessly. Here’s the list
(1) factory walnut stock with metal hardware (In pretty good condition)
(1) factory barrel (shows with a lot of blueing wear, surface rust that was cleaned up with steel wool)
(1) metal trigger assembly with Rimfire Tech bolt release (original release included) trigger pins and metal bolt stop trigger shows blueing wear
(1) factory bolt and charging handle
(1) vblock
The above gets you a “factory” 10/22
(1) modified 10/22 stock with the barrel band tip removed, finger grooves installed in foreend, and barrel channel opened up to accept a .920 barrel. I planned to paint this out but I liked the 2 tone and moved on to other projects.
(1) 16.5” Kidd Lightweight Fluted barrel (non-threaded)
(1) tech sight base rear and unknown front globe sight
(1) 10rd ruger magazine
(1) 25rd ruger magazine
As noted, I’d like to sell as a packages deal. This could be a fun build project and gives a lot of options to try out.
Looking to get $425 for everything not really interested in trades but would consider cz rimfires plus/minus cash.
if you see something you really want feel free to offer me your best price. I’ll respond to all reasonable offers with a yes or no.
Pictures:
DISCLAIMER: Always comply with local, state, federal, and international law. The Outdoors Trader does not become involved in transactions between parties. Review our
Privacy Policy
and
Terms of Use
for more information.