Item Name: FS/FT 1906 Winchester - $190 $165!!!
112 year old Project Rifle
Location: Canton
Zip Code: 30115
Item is for: Sale or Trade
Sale Price: 165
Trade Value or Items Looking For: 190. Other firearms.
Caliber: 22 Short
Willing to Ship: No
Bill of Sale Required?: No
Item Description: My loss your gain.
Bought this as a project and lost interest.
It’s a 1912 production year Winchester 1906.
I painstakingly sanded down the barrel and action with very fine grit paper avoiding and maintaining all roll marks then reblued with cold blue. It came out decent but I attempted to brown the finish and it created the spots you see on the receiver.
The good - all parts present except butt pad (I have a new reproduction to replace it), action works well, locks up tight and fires.
The bad - I believe the barrel is shot out as the shell casing after firing expands and you have to pull it out.
The outer magazine tube has a dent that keeps the replacement inner mag tube from going all the way in. This should be reparable with a little finesse. The front hanger needs to be re-filed and refitted.
New parts included for restoration- buttplate, front hanger, inner magazine tube, butt plate screws, action slide escutcheons.
Pictures:
112 year old Project Rifle
Location: Canton
Zip Code: 30115
Item is for: Sale or Trade
Sale Price: 165
Trade Value or Items Looking For: 190. Other firearms.
Caliber: 22 Short
Willing to Ship: No
Bill of Sale Required?: No
Item Description: My loss your gain.
Bought this as a project and lost interest.
It’s a 1912 production year Winchester 1906.
I painstakingly sanded down the barrel and action with very fine grit paper avoiding and maintaining all roll marks then reblued with cold blue. It came out decent but I attempted to brown the finish and it created the spots you see on the receiver.
The good - all parts present except butt pad (I have a new reproduction to replace it), action works well, locks up tight and fires.
The bad - I believe the barrel is shot out as the shell casing after firing expands and you have to pull it out.
The outer magazine tube has a dent that keeps the replacement inner mag tube from going all the way in. This should be reparable with a little finesse. The front hanger needs to be re-filed and refitted.
New parts included for restoration- buttplate, front hanger, inner magazine tube, butt plate screws, action slide escutcheons.
Pictures:
DISCLAIMER: Always comply with local, state, federal, and international law. The Outdoors Trader does not become involved in transactions between parties. Review our
Privacy Policy
and
Terms of Use
for more information.
