Item Gone: FS/FT Colt/radian 14.5 P&W upper complete.

[GTOTTY]

Item Name: Item Gone: FS/FT Colt/radian 14.5 P&W upper complete.

Location: Avondale estates

Zip Code: 30002

Item is for: Sale or Trade
Sale Price: $550
Trade Value or Items Looking For: $650. I like HK’s. Also interested in an MRO on a Unity or similar mount.

Caliber: 223_556

Willing to Ship: Yes

Bill of Sale Required?: No

Item Description: Started life as a stripped 14.5 colt upper from Brownells. Had GA firing line pin the A2 for a 16” OAL. I run a Rotrex from B&T hence the choice of A2. Ended up getting a deal at work on an FN complete 11.5” upper and went full SBR. Has a Microbest BCG and Raptor SD CH got the BCG at tru prep, and the CH at GFL. Decided life is too short for long barrels, so this one is up for grabs. Rear sight is a Magpul Pro metal sight which is quite nice. I have probably $700 or so at least. Round count is around 1k. Muzzle device is the only real indicator my Rotrex got it pretty dirty.

As it came up before last time I listed near as I can measure it’s right at 16”

Pictures:

 

[GTOTTY]

Bump, buyer just backed out.

 

[Aimless]

Just curious unless I missed it but is it an extended A2 hider or an A2 hider with a spacer? Just asking since a standard A2 with a crush washer on a 14.5” doesn’t get you to 16”. You’d need a 14.7” with a standard A2 and crush washer to get you to 16”. With a standard A2 and a crush washer P&W on a 14.5” will only get you to OAL of 15.89". You might want to re-measure this time using a dowel down the barrel against the bolt face. This is how the ATF supposedly does it which can further cause some measurement issues. That’s why the industry standard just to be safe is at least 16.1”.

 

[GTOTTY]

Just curious unless I missed it but is it an extended A2 hider or an A2 hider with a spacer? Just asking since a standard A2 with a crush washer on a 14.5” doesn’t get you to 16”. You’d need a 14.7” with a standard A2 and crush washer to get you to 16”. With a standard A2 and a crush washer P&W on a 14.5” will only get you to OAL of 15.89". You might want to re-measure this time using a dowel down the barrel against the bolt face. This is how the ATF supposedly does it which can further cause some measurement issues. That’s why the industry standard just to be safe is at least 16.1”.

Has a washer. Was told it’s 16 now.