Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Yes, appears to be a thicker gauge.Does the 9mm barrel have thick walls (40-9 conversion) and fit snuggly or is it just a drop in 9 barrel?
The magazines can actually fit 9mm too, previous owner used them that way. I have not tried myself.Does it come with different magazines for the other calibers or just one
Works for length but 9 will rattle because the cup in the follower is too big.The magazines can actually fit 9mm too, previous owner used them that way. I have not tried myself.
Based on the images, the 9 mm barrel appears to be an EFK FireDragon 9 mm conversion barrel, which works with the .40/.357 locking insert and has a larger diameter outside to fit in the .40/.357 slide.Does the 9mm barrel have thick walls (40-9 conversion) and fit snuggly or is it just a drop in 9 barrel?
Yes, they will fit, as most things smaller will fit in a bigger space, right, but is it a recommended practice, especially with the taper of a double stack magazine that has some inherent looseness as it channels/directs the rounds to feed... P229 12-round mags for this model can be bought for around $20 each so is it worth the risk for potential feed issues?The magazines can actually fit 9mm too, previous owner used them that way. I have not tried myself.
The barrel is the EFK fire dragon you mentioned and has the same outside diameter as both of the other barrels.Based on the images, the 9 mm barrel appears to be an EFK FireDragon 9 mm conversion barrel, which works with the .40/.357 locking insert and has a larger diameter outside to fit in the .40/.357 slide.
Yes, they will fit, as most things smaller will fit in a bigger space, right, but is it a recommended practice, especially with the taper of a double stack magazine that has some inherent looseness as it channels/directs the rounds to feed... P229 12-round mags for this model can be bought for around $20 each so is it worth the risk for potential feed issues?