Item Gone! FS M&P Shield $399.99 no Tax

[Mj1268]

Item Name: M&P Shield $399.99 no Tax
Location: Rockmart

Zip Code: 30153

Item is for: Sale or Trade

Sale Price: $399.99

Trade Value or Items Looking For: Post Recall with box & docs

Caliber: 9mm

Willing to Ship: No

Bill of Sale Required?: No

Item Description: "LNIB" Smith & Wesson Shield 9mm. I have only had this gun for about 10 days. I shot exactly 16 rounds through it. And only carried it for 3 days. It is perfect.
2nd pic shows this gun was made after the recall and is not one of the recalled guns.

I would consider trading this towards
Model 1894CSS Marlin .357 or 44 in short Stainless Steel Lever Guns.
Ruger SR-762
I am not interested in other trades.

Pictures:

 

[olchevy]

I didn't know these were recalled, what was the problem?

 

[Aegis]

I didn't know these were recalled, what was the problem?

https://secure05.lwcdirect.com/fron...inType=skipWelcome&clientID=742&campaignID=63

 

[Projectwidow]

https://secure05.lwcdirect.com/fron...inType=skipWelcome&clientID=742&campaignID=63

Looks like it is a secure link? I get an error message saying the page could not be found.

 

[tdi_g]

The recall was simply the trigger safety sticking allowing the trigger to be pulled without your finger being on it. On the models made before August 2013, I believe, all you had to do the check that the trigger safety returns back to its original position. I am not even sure why they felt the need to issue a recall on it.

 

[Aegis]

Looks like it is a secure link? I get an error message saying the page could not be found.

[TABLE="width: 700, align: center"]
[TR]
[TD="colspan: 2"]IMPORTANT CONSUMER SAFETY ALERT and INSPECTION PROCEDURE
August 22, 2013
[/TD]
[/TR]
[TR]
[TD="align: left"]PRODUCT:
[/TD]
[TD]ALL M&P Shield™ firearms manufactured before August 19, 2013.
[/TD]
[/TR]
[TR]
[TD]DESCRIPTION OF THE HAZARD:
[/TD]
[TD]Smith & Wesson has identified a condition where the trigger bar pin could damage the lower trigger in certain M&P Shields in a way that may affect the functionality of the drop safety feature of the firearm, potentially allowing the pistol to discharge if it is dropped.
Any unintended discharge of a firearm has the potential to cause injury, and we ask that you STOP USING YOUR PISTOL IMMEDIATELY UNTIL IT HAS BEEN INSPECTED AND, IF THE CONDITION IS FOUND, REPAIRED.
[/TD]
[/TR]
[TR]
[TD]DESCRIPTION OF THE PRODUCT INVOLVED:
[/TD]
[TD]This Safety Alert applies to all M&P Shield pistols manufactured before August 19, 2013. We believe this condition is largely limited to recently manufactured M&P Shield pistols. However, out of an abundance of caution, we are asking allconsumers of all M&P Shields manufactured before August 19, 2013 to immediately inspect their pistols for this condition.

To determine whether your firearm was manufactured before August 19, 2013 click HERE
[/TD]
[/TR]
[TR]
[TD]INSPECTING YOUR PISTOL
[/TD]
[TD]Your firearm must be inspected to determine whether it exhibits the condition identified in this notice. To determine whether your firearm is affected by this condition, please inspect your firearm as follows: (Video instructions availablehere)

[TABLE="width: 550"]
[TR]
[TD]

1. Follow the procedures in your Safety & Instruction Manual to ENSURE THE FIREARM IS UNLOADED; ENSURE THAT THE MUZZLE IS POINTED IN A SAFE DIRECTION; THE SLIDE IS LOCKED BACK; AND THE MANUAL SAFETY IS ENGAGED.
2. Hold your pistol sideways with the muzzle pointed to the left. Look at the trigger. Note that the trigger is actually two pieces, with a pin in the middle that connects the two halves (Figure 1).
3. Look at Figure 2. Without touching the trigger, identify the plastic tab circled in red in Figure 2.
4. Slowly pull the trigger. The plastic tab encircled in Figure 2 should disappear into the upper trigger section (Figure 3).
5. Slowly release the trigger. The tab should reappear as shown in Figure 2 completely on its own.
6. Repeat steps 4 and 5 several times. If the small tab as shown in Figure 2 reappears each time, your pistol does not require repair.
   
   
7. If the small tab does not consistently reappear as shown in Figure 2, YOUR PISTOL MUST BE RETURNED FOR SERVICE.

[/TD]
[TD]

[/TD]
[/TR]
[/TABLE]
If you are uncomfortable conducting the inspection outlined above, or are unsure whether the condition described in this notice applies to your firearm, please take your firearm to your local M&P Certified Armorer or send your firearm to Smith & Wesson for inspection. M&P Armorers can be found on the smith-wesson.com website under Find a Dealer.

If after inspection it is determined that the condition outlined in this safety alert exists, the firearm must be sent to Smith & Wesson for repair.

[/TD]
[/TR]
[TR]
[TD="align: left"]REMEDY/ACTION TO BE TAKEN:
[/TD]
[TD]STOP USING YOUR FIREARM UNTIL IT HAS BEEN INSPECTED AND, IF THE CONDITION IS FOUND, REPAIRED.


Your firearm must be inspected to determine whether it exhibits the condition identified in this notice. To determine whether your firearm is affected by this condition, please inspect your firearm by following the inspection instructions above.

If your firearm is affected by the condition outlined in this notice, please send your pistol to Smith & Wesson. Your firearm will be inspected, and if necessary, repaired at no cost to you. Your firearm will be returned within 5 to 7 business days. All shipping and repair costs will be covered by Smith & Wesson.

Outside the United States, click HERE for a list of Authorized Warranty Centers that will repair your pistol.
[/TD]
[/TR]
[TR]
[TD]CONSUMER CONTACT:
[/TD]
[TD]Please contact Smith & Wesson directly at 877-899-6259, or atMPShieldSafetyAlert.com to arrange for the repair, if necessary, of your pistol.[/TD]
[/TR]
[/TABLE]

 

[Mj1268]

This one was made after the recall. It's new!
After buying it I traded a 22 for an XDS 9 so one of the 9's has to go.

 

[pomack68]

Better safe than sorry, I have two of them the 9 and 40 good gun

 

[Mj1268]

SOLD pending meet.....

 

[1jcwallace]

Good deal there. Laugh every time I see one listed for above $400. Wish you were closer!