• If you are having trouble changng your password please click here for help.

Item Gone: FS Winchester USGI M1 Carbine

Status
Not open for further replies.

Tgunner

Default rank <200 posts Supporter
Hunter
33   0
Joined
Jan 19, 2013
Messages
124
Reaction score
92
Location
Monroe
Item Name: FS Winchester USGI M1 Carbine

Location: monroe

Zip Code: 30655

Item is for: Sale Only
Sale Price: $1100

Caliber: .30 Carbine

Willing to Ship: No

Bill of Sale Required?: No

Item Description: Winchester M1 Carbine 5.7 mil 2/44 to 11/44 range. Winchester marked stock/2 rivet handguard, recoil plate, round bolt, TH, hammer, mag catch and slide. Milled H (Hamphill) in shield rear sight and Nieder milled front sight. The front band is type 3 KI marked. The stock also has the Benicia Arsenal markings with CAB, (Charles A Byland) inspector. This carbine appears as a post war rebuild with flip safety and type 3 band. The sear is a no hole and I think its a IBM. Not sure about the trigger, extractor or FP. There are no import marking that I have found. Bore is excellent. Finish is grey greenish throughout most of the metal, but does show wear particularly in the area in front of the barrel band, bolt, and to the buttplate. The Winchester cartouche and sling well "W" shows well.
Comes with a 15 rd circle B (Bridgeport) magazine that is parkerized. Comes with IS marked oiler and a uncharismatic sling that is probably commercial.

I only check my personal emails couple times during the day, so be patient please.
I cannot drive far, Monroe, Loganville maybe Athens. Will need to see GDL.
PM questions please.

Pictures:
img_4692-jpg.574474

img_4687-jpg.574475

img_4690-jpg.574476

img_4693-jpg.574479

img_4673-jpg.574480
 
DISCLAIMER: Always comply with local, state, federal, and international law. The Outdoors Trader does not become involved in transactions between parties. Review our Privacy Policy and Terms of Use for more information.
Thanks gentlemen. Muzzle gauge Pic added. Headspace gauges, closes on 1.290 and doesn't come close to closing on 1.298. Took the trigger housing apart this evening and it does have Winchester trigger. Sear is an IBM no-hole.
IMG_4702.JPG
 
Status
Not open for further replies.
Back
Top Bottom