Item Name: FT 1994 Harley fxrp w/extra motor and 03 bayou 250
Location: Stone mountain
Zip Code: 30087
Item is for: Trade Only
Trade Value or Items Looking For: Around 7500 (55-59 Chevy truck) or 4x4 Chevy truck
Willing to Ship: No
Bill of Sale Required?: No
Item Description: Up for trade is a built 1994 Harley Davidson fxrp with an extra motor and a ton of parts.
Also in this deal is a 2003 Kawasaki bayou 250 2wd
I've been a Harley tech for 15 years, just lookin for another hobby
The bike has s&s heads, rocker boxes and Pistons,the carb is also an s&s with a thunder jet. The heads have been fully worked with stainless valves and roller rockers
Woods .590" cam, crane lifters and pushrods
S&s breather reed valve
Baisley double speed oil pump gears
Primary drive is a bdl belt system with a dry clutch, chain final drive
The bike was completely disassembled and rewired in 2012
Jay brake hand controls.
Plenty more
The spare motor just needs a valve job. I have the new valves, the motor has all new bearings and bushings installed.
New con rods and crank pin, crankshaft has been balanced with paperwork
New cylinder studs as well
Atv runs good, doesn't smoke. Does need a battery, I just pull start it
I'm mainly looking for a 55-59 Chevy truck or a Chevy 4x4 full size. But shoot me offers in that realm
Thanks for reading my novel
Pictures:
Location: Stone mountain
Zip Code: 30087
Item is for: Trade Only
Trade Value or Items Looking For: Around 7500 (55-59 Chevy truck) or 4x4 Chevy truck
Willing to Ship: No
Bill of Sale Required?: No
Item Description: Up for trade is a built 1994 Harley Davidson fxrp with an extra motor and a ton of parts.
Also in this deal is a 2003 Kawasaki bayou 250 2wd
I've been a Harley tech for 15 years, just lookin for another hobby
The bike has s&s heads, rocker boxes and Pistons,the carb is also an s&s with a thunder jet. The heads have been fully worked with stainless valves and roller rockers
Woods .590" cam, crane lifters and pushrods
S&s breather reed valve
Baisley double speed oil pump gears
Primary drive is a bdl belt system with a dry clutch, chain final drive
The bike was completely disassembled and rewired in 2012
Jay brake hand controls.
Plenty more
The spare motor just needs a valve job. I have the new valves, the motor has all new bearings and bushings installed.
New con rods and crank pin, crankshaft has been balanced with paperwork
New cylinder studs as well
Atv runs good, doesn't smoke. Does need a battery, I just pull start it
I'm mainly looking for a 55-59 Chevy truck or a Chevy 4x4 full size. But shoot me offers in that realm
Thanks for reading my novel
Pictures:
DISCLAIMER: Always comply with local, state, federal, and international law. The Outdoors Trader does not become involved in transactions between parties. Review our
Privacy Policy
and
Terms of Use
for more information.


