For sale is a 13.9" Pin and Welded 13.9" AR-15 with the following parts. It has only been assembled and that is it, no rounds through it. Mounted Optics, BUIS, racked the upper are the only things done with it. Ended up buying/building other rifles and decided to just assemble the parts I had already and cut this one loose. Everything is in great condition, only minor marks I can see is from mounting optics and buis and removing, but you have to look hard for them, wear on charging handle from racking the upper and there's a picatinny section on the handguard that looks like a blem, see pictures'. Composed of the following parts.
Complete Upper
- ADM Upper Receiver
- ADM 13" M-Lok Handguard (two clamping screws was torqued to 55 in/lbs per the instruction range of 55-60, two other screws were hand tight per instructions)
- Radian Raptor SD charging handle
- Toolcraft Nickel Boron BCG with 158 Carpenter Bolt
- Black River Tactical 13.9" Optimum Hammer Forged Chrome Lined Barrel (Torqued to 50 ft/lbs per the instruction range of 50-65)
- SLR GB7 micro gas block and midlength gas tube (gas block is non-adjustable)
- Surefire 3 Prong Flash Hider Pin Welded by Retro Arms Works (pin weld work is immaculate, hard to see, you can tell there is a pin weld b/c the dimple is no longer visible
-Daniel Defense M-Lok Vertical Grip
- Streamlight protac hl-x weapon light
- Black Slate Industries M-Lok Rail Covers
- BCM nylon M-Lok picatinny section
- Midwest Industries aluminum M-Lok picatinny section
- Primary Arms MD-25 Red Dot with kill flash Included - has been used with a 7.62x39 about 1k rounds. Still running, for more pictures of it, pm me. At the limit for uploaded pictures.
Complete Lower
- ADM UIC Lower
- Radian Talon Ambi Safety
- Laure MBT-2S (heavy spring included)
- Magpul K2 Grip
- ADM qd endplate
- BCM castle nut
- BCM A5 Buffer Tube
- Vltor H2 buffer system
- BCM Sopmod Mod 1 Stock
$1700 for everything, will not break this up, if anyone wants to do a transfer at a FFL, cost of transfer will be included in total.
Complete Upper
- ADM Upper Receiver
- ADM 13" M-Lok Handguard (two clamping screws was torqued to 55 in/lbs per the instruction range of 55-60, two other screws were hand tight per instructions)
- Radian Raptor SD charging handle
- Toolcraft Nickel Boron BCG with 158 Carpenter Bolt
- Black River Tactical 13.9" Optimum Hammer Forged Chrome Lined Barrel (Torqued to 50 ft/lbs per the instruction range of 50-65)
- SLR GB7 micro gas block and midlength gas tube (gas block is non-adjustable)
- Surefire 3 Prong Flash Hider Pin Welded by Retro Arms Works (pin weld work is immaculate, hard to see, you can tell there is a pin weld b/c the dimple is no longer visible
-Daniel Defense M-Lok Vertical Grip
- Streamlight protac hl-x weapon light
- Black Slate Industries M-Lok Rail Covers
- BCM nylon M-Lok picatinny section
- Midwest Industries aluminum M-Lok picatinny section
- Primary Arms MD-25 Red Dot with kill flash Included - has been used with a 7.62x39 about 1k rounds. Still running, for more pictures of it, pm me. At the limit for uploaded pictures.
Complete Lower
- ADM UIC Lower
- Radian Talon Ambi Safety
- Laure MBT-2S (heavy spring included)
- Magpul K2 Grip
- ADM qd endplate
- BCM castle nut
- BCM A5 Buffer Tube
- Vltor H2 buffer system
- BCM Sopmod Mod 1 Stock
$1700 for everything, will not break this up, if anyone wants to do a transfer at a FFL, cost of transfer will be included in total.
Attachments
-
PXL_20221024_041748212.jpg79.1 KB · Views: 3,256
-
PXL_20221024_041835947.jpg88 KB · Views: 63
-
PXL_20221024_041846504.jpg256.8 KB · Views: 63
-
PXL_20221024_041859213 - Copy.jpg213.7 KB · Views: 63
-
PXL_20221024_015231259.jpg170.3 KB · Views: 60
-
PXL_20221024_015301577.jpg150.8 KB · Views: 59
-
PXL_20221024_015312934.jpg139.7 KB · Views: 57
-
PXL_20221024_015321739.jpg135 KB · Views: 55
-
PXL_20221024_015335421.jpg76.1 KB · Views: 53
-
PXL_20221024_015647081.jpg151.2 KB · Views: 52
-
PXL_20221024_015654955.jpg119.6 KB · Views: 49
-
PXL_20230102_041534945.jpg188.1 KB · Views: 48