Remington 700 Accuracy Barrel® 6.5 Creedmoor 1:8
Its All About Alignment... Our barrel making process focuses on all aspects of alignment: Alignment of the bore with the contour; of the bore with the crown, of the chamber with the bore; of the throat with the chamber; of the barrel with the action; and so on. The better everything is aligned, the closer each aspect can fit... All to create the most consistent flight of your bullets. Over the years, we have developed techniques and customized our machinery to address all aspects of alignment and the result is out trademark Accuracy Barrel®. Accuracy Barrels are Chromoly steel, blue finish. Be sure to order a chamber that matches your existing bolt face. For example, a 308 bolt fits 6.5 Creedmoor, 6mm Creedmoor, 7-08, 243 Win, etc.
Free Bore Paste Cleaning Kit - Bore Paste assures sufficient cleaning of carbon and copper fouling for the quickest and most trouble free barrel break-in as well as keeping your barrel match accuracy clean. It's the choice of Bench Rest Competitors... Complete Instructions Included.
One-at-a-Time Barrel Making- True, center-to-center barrel turning at a rate that minimizes stress while keeping the bore in the middle. True, center-to-center chamber reaming insures centering and linear alignment of the chamber with the bore. True, center-to-center 11° target crown, applied after finishing, insures that bullets exit the barrel with perfectly even gas pressure. (The bright metal crown is a Trademark of E. Arthur Brown Company)
Barrel , barrel nut , cleaning paste
This is brand new unused barrel
245 rds once fired Hornady brass
6.5 creedmor chamber gauges go and no-go
$350
- Fits Remington 700 Series Rifles with No Modifications*.
- Easy Installation and Headspacing with Remage Barrel Nut System (Included).
- 26" length, Tapered to .800" Muzzle, Varmint/Target weight approx 3lbs.
- Bore dimensions reamed consistent to airgauge within .0002" (2/10,000ths) of proper bore dimension.
- Two-Pass Button Rifled for Consistent Twist, Bore Diameter, and Surface Burnish.
- Contoured, Chambered, and Crowned Center-to-Center for best possible alignment.
- We use the best Chromoly steel alloys.
- One-at-a-time barrel making process for superb accuracy
- *Barrel Channel on Your Stock May need widening.
Its All About Alignment... Our barrel making process focuses on all aspects of alignment: Alignment of the bore with the contour; of the bore with the crown, of the chamber with the bore; of the throat with the chamber; of the barrel with the action; and so on. The better everything is aligned, the closer each aspect can fit... All to create the most consistent flight of your bullets. Over the years, we have developed techniques and customized our machinery to address all aspects of alignment and the result is out trademark Accuracy Barrel®. Accuracy Barrels are Chromoly steel, blue finish. Be sure to order a chamber that matches your existing bolt face. For example, a 308 bolt fits 6.5 Creedmoor, 6mm Creedmoor, 7-08, 243 Win, etc.
Free Bore Paste Cleaning Kit - Bore Paste assures sufficient cleaning of carbon and copper fouling for the quickest and most trouble free barrel break-in as well as keeping your barrel match accuracy clean. It's the choice of Bench Rest Competitors... Complete Instructions Included.
One-at-a-Time Barrel Making- True, center-to-center barrel turning at a rate that minimizes stress while keeping the bore in the middle. True, center-to-center chamber reaming insures centering and linear alignment of the chamber with the bore. True, center-to-center 11° target crown, applied after finishing, insures that bullets exit the barrel with perfectly even gas pressure. (The bright metal crown is a Trademark of E. Arthur Brown Company)
Barrel , barrel nut , cleaning paste
This is brand new unused barrel
245 rds once fired Hornady brass
6.5 creedmor chamber gauges go and no-go
$350