Almost new Sig Mosquito. All friction surfaces have been polished to aid in reliability. The feed ramp and breach has also been polished. I took apart the firing pin block and polished the firing pin. The firing pin in these pistols are made out of stamped steel. The firing pins can inherently leave the factory with a slight roll and burrs due to the stamping. I took out the firing pin and made sure it was completely flat and removed it’s burrs. This will drastically enhance the reliability of this pistol. I tested the pistol using run of the mill 22lr range ammo to make sure it ran 100% reliably. I also did a through job in cleaning and oiling the pistol. Comes with the box, doc, extra power recoil spring, and one mag. The pistol is in great shape and ready for a new home. Pick up off of Wade Green Rd in Kennesaw at the Publix.
