Like title states, I’m looking for a 300blk trim die. Let me know if you have one.
-
If you are having trouble changng your password please click here for help.
Looking for a 300blk trim die
- Thread starter Cartman
- Start date
I see a Redding in stock at Midway, at least one Lee on eBay. Are you looking for a certain brand?
Between the main sellers on the net, Midway, Grafs, Brownells, then eBay one should be able to find most any die.
Between the main sellers on the net, Midway, Grafs, Brownells, then eBay one should be able to find most any die.
I have a Honey Badger set up.
I’m looking for a Dillon or a Whidden and none of them sell those, not even EBay. I found a Lyman, but was told to stay away from them. I want to process 223 to 300blk, so it MUST have the chip evacuation ports. A quick trim die will not work for this application, but thanks.
This says it is for the Dillon 1200. Do you think it would work?
https://www.ch4d.com/products/popular-calibers/300-blackout/DT300AAC
Here is another one:
https://www.gsiinternational.com/2pc-300-blackout-trim-die-set-_8_4243_8646.html
I have a Dillon and would be happy to provide measurements and/or photographs.
One more to look at:
https://www.whiddengunworks.com/product/trim-die-2/
On that one, Be sure to purchase upper trim die lock nut separately ( Dillon part# 13559) .
Also if you are using a Dillon, you need the short toolhead:
https://www.dillonprecision.com/xl-650-short-trim-die-toolhead_8_8_26197.html
https://www.ch4d.com/products/popular-calibers/300-blackout/DT300AAC
Here is another one:
https://www.gsiinternational.com/2pc-300-blackout-trim-die-set-_8_4243_8646.html
I have a Dillon and would be happy to provide measurements and/or photographs.
One more to look at:
https://www.whiddengunworks.com/product/trim-die-2/
On that one, Be sure to purchase upper trim die lock nut separately ( Dillon part# 13559) .
Also if you are using a Dillon, you need the short toolhead:
https://www.dillonprecision.com/xl-650-short-trim-die-toolhead_8_8_26197.html
I called Whidden yesterday, they said in 2 weeks they will have more in stock. I’m quite aware about the tool head situation, I cut and make my own tool heads. This is not my first redo with this, I already have one tool head set up for trimming 223 and I want a separate tool head for 300blk. And as far as the 13/16-20 lock nut don’t spend the $9 from Dillon and $10 for shipping when you can go to the auto parts store and pick up an axle nut which is the same 13/16-20 threaded as the lock washer for only $2.50. I’m surprised you didn’t mention the vacuum shroud……well I have that covered as well. I’m just trying to find a 300blk trim die either Dillon or Whidden. I was trying to get one before waiting 2 weeks, buts it’s not big deal.
Here is my 223 set up and it works like a dream, as fast as I can pull the handle. For 300blk I will get a shop vac. This is my Honey Badger set up. It’s 2 1/4hp compared to Dillion 1/4hp. and it cost less.
THAT SUCKS!
