I am looking for a way to mount a modern scope, not a long eye relief, scout type to my M91, anyone have any creative ideas or have done this already.
All inout appreciated.
Thanks,
All inout appreciated.
Thanks,
-
ODT Gun Show this Saturday! - Click here for info and tickets!
Moison Scope mount
- Thread starter RiverBend
- Start date
Its been done get a rock solid mount.
according to their website it onl;y works on a hex reciever,and it don't mention the need for a revised bolt handle, and it references it as a scout mount, not a regular scope mount, please let m,e know if I am mis-reading this.
Thanks for your input
Rock Solid Industries is proud to announce the release of our newest addition to the product line, The RSI Scout Mount. Our Scout Mount is machined out of a solid block of T6061 aluminum and a special hard coating is applied that reduces chipping and scratching. This mount also features a 3 point mounting system that makes it the most stable scout mount available on the market today. Other mounts that do not have this mounting system may suffer from the teeter tottering effect under recoil, a condition where the scope and rail physically rock up and down, this is hard of your optics and can cause early failure . Our scout mount design also features a longer rail so that you have the room to include other optics such as night vision or other rail accessories. There are also detailed installation instructions both included and online.
Our scope mount has been tested to 300 yards with outstanding results. Your results may very due to optics used and shooting skill. The mount is available now through our online store.
This Mosin Nagant Scout Scope Mount features:
•Round receiver support only
• 6061 aluminum construction
•Special hard coating that reduces chipping and scratching
•Resistance to salt spray corrosion
•3 mounting points (two on the top forward part of the receiver and one at the front of the existing site). Our scope mounts use the same top two mounting points as some similar mounts on the market.
•No stock inletting needed
•Design that allows the shooter to get a lower, more proper check weld
•Allows shooter maximum adjustment for proper scope placement for better eye relief
•Supports the rear of the scope to eliminate movement for improved accuracy, unlike other mounts on the market
•Testing up to 300 yards with fantastic results. Try that with your mount!
This scope mount combo includes:
•3 mounting screws
•Allen wrench
•Drill Bit
•Roll Pin
•Detailed installation instructions
Please Note: This scout mount works ONLY on the Mosin Nagant M91/30 Round receiver.
Thanks for your input
Rock Solid Industries is proud to announce the release of our newest addition to the product line, The RSI Scout Mount. Our Scout Mount is machined out of a solid block of T6061 aluminum and a special hard coating is applied that reduces chipping and scratching. This mount also features a 3 point mounting system that makes it the most stable scout mount available on the market today. Other mounts that do not have this mounting system may suffer from the teeter tottering effect under recoil, a condition where the scope and rail physically rock up and down, this is hard of your optics and can cause early failure . Our scout mount design also features a longer rail so that you have the room to include other optics such as night vision or other rail accessories. There are also detailed installation instructions both included and online.
Our scope mount has been tested to 300 yards with outstanding results. Your results may very due to optics used and shooting skill. The mount is available now through our online store.
This Mosin Nagant Scout Scope Mount features:
•Round receiver support only
• 6061 aluminum construction
•Special hard coating that reduces chipping and scratching
•Resistance to salt spray corrosion
•3 mounting points (two on the top forward part of the receiver and one at the front of the existing site). Our scope mounts use the same top two mounting points as some similar mounts on the market.
•No stock inletting needed
•Design that allows the shooter to get a lower, more proper check weld
•Allows shooter maximum adjustment for proper scope placement for better eye relief
•Supports the rear of the scope to eliminate movement for improved accuracy, unlike other mounts on the market
•Testing up to 300 yards with fantastic results. Try that with your mount!
This scope mount combo includes:
•3 mounting screws
•Allen wrench
•Drill Bit
•Roll Pin
•Detailed installation instructions
Please Note: This scout mount works ONLY on the Mosin Nagant M91/30 Round receiver.
http://www.ebay.com/itm/Russian-Mos...798?pt=LH_DefaultDomain_0&hash=item1c4a44cf56
This is your next best.
This is your next best.
I saw a mosin scope mount at Dobbs today
